Installation, 2 - 4 Positioning and leveling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Ecodesign regulation LTE 14-H208 A+.R Description of the appliance, 5 Overview Control panel Loading the rack, 6 Lower rack and cutlery basket...
Installation Keep this instruction manual in a safe place for Connecting the water inlet hose future reference. If the appliance is sold, given away • To a suitable cold water connection point: before or moved, please ensure the manual is kept with the attaching the hose, run the water until it is perfectly clear machine, so that the new owner may benefit from so that any impurities that may be present in the water do...
Installation Anti-flooding protection If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical To ensure floods do not occur, the dishwasher: Assistance Service in order to prevent all potential - is provided with a special system which blocks the water hazards.
Installation Technical data Width 59.7 Dimensions Height 81.5 Depth 55.2 Capacity 14 standard place-settings 0.05 – 1 MPa (0.5 – 10 bar) Water supply pressure 7.25 – 145 psi Power supply voltage See appliance data plate Total absorbed power See appliance data plate Fuse See appliance data plate, and follow local regulations.
Loading the racks Before loading the racks, remove all food residue Upper rack from crockery and empty liquids from glasses and Load this rack with delicate and lightweight crockery: cups. glasses, cups, saucers and shallow salad bowls. After loading the appliance, make sure that the sprayer arms can rotate freely.
Start-up and use Starting the dishwasher Measuring out the detergent 1. Turn the water tap on. A good wash result also depends on the correct amount of detergent being used; exceeding the stated 2. Open the door and press the ON/OFF button: you will amount does not result in a more effective wash and hear a short beep and the display and option indicator increases environmental pollution.
Wash cycle Table of wash cycle The number and type of wash cycles and options may vary depending on the dishwasher model. Detergent Wash cycle duration Wash cycle Wash cycle selection (A) = compartment A (B) = compartment B (tolerance ± 10%) Wash cycle which include Options...
Rinse aid and salt • Press the P button repeatedly until the desired hardness Only use products which have been specifically level has been reached (1-2-3-4-5* see Water hardness designed for dishwashers. Do not use table salt or table). industrial salt, or washing up liquid. Follow the instructions given on the packaging.
Care and Maintenance Shutting off the water and electricity supplies Cleaning the filters • Turn off water tap after every wash cycle to avoid leaks. The filter assembly consists of three filters which remove food residues from the washing water and then recirculate •...
Precaution For further information relating to the correct disposal of This appliance was designed and manufactured in household appliances, owners may contact the relevant compliance with current international safety public authority or the local appliance dealer. standards. The following information has been provided for safety reasons and should therefore be read carefully.
Troubleshooting Whenever malfunctions occur, check for a solution from the following list before calling for Assistance. Problems: Possible causes / Solutions: The dishwasher does not start or cannot • Switch off the appliance by pressing the ON/OFF button, switch it back on after be controlled.
Need help?
Do you have a question about the LTE 14-H208 A+.R and is the answer not in the manual?
Questions and answers