4 Get started
Supplied accessories
•
Remote control
•
2 x AAA, 1.5V batteries
•
M4 x 10 double sems screw x 4
•
AC Power cord
•
Cable management tie
•
User Manual
•
Quick Start Guide
Mounting stand onto TV
Applicable to TVs without mounted stands.
1
2
x 4
Note
•
To wall mount the TV, refer to the addendum.
•
If you lose the stand mounting screws, please purchase 4 Philips head screws (M4×10)
at your local store.
EN
EN
8
Positioning the TV
Warning
•
Do not insert the AC power cord into the power socket outlet before all the
connections are made.
•
Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.
•
Before you move the TV, disconnect attached cables to prevent damage to connectors.
In addition to reading and understanding safety instructions, consider
the following before positioning your TV:
•
Ensure that you always have easy access to the AC power cord or
plug to disconnect the TV from the power.
•
If the TV is mounted on a swivel base, ensure that no strain is
placed on the AC power cord when the TV is swiveled. Strain on
the AC power cord can loosen connections.
•
The ideal viewing distance for watching TV is three times its screen size.
•
Position the TV where light does not fall on the screen.
•
Connect your devices before you position the TV.
Using a Kensington lock
There is a Kensington security slot on the back of the TV. Prevent theft
by looping a Kensington lock between the slot and a permanent object,
such as a heavy table.
Installing the remote control batteries
1
Slide the battery cover off the back of the remote control.
2
Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −
ends of the batteries line up with the markings inside the case.
3
Slide the cover back into position.
Note
•
Remove the batteries if not using the remote control for an extended period of time.