Advertisement
This section describes commonly encountered
issues and accompanying solutions.
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
Check that the power cable is securely
connected.
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
Replace the remote control batteries if
they are flat or weak.
Clean the remote control and TV sensor
lens.
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
Enter '8888'.
Change the TV menu to your preferred
language.
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools down and warms up.
This does not impact performance.
38
To remove the logos and images, set the
location of your TV to home.
1. Press
.
2. Select
>
>
3. Select
and press
Check that the correct channel list is
selected.
Check that the TV supports DVB-T,
DVB-T Lite or DVB-C in your country.
During installation, make sure that
you select the country where you are
installing the TV (see 'Step 2 Select your
country' on page 27).
>
.
.
Advertisement
