Dvd Player Or Other Accessory Digital Source Devices - Philips 32PF9630A/37 User Manual

DVD Player or other accessory digital source devices

Devices with Component Video Output Connectors (YPbPr)
AV1/AV3
YPbPr
1
DVD / STB
Devices with RGB output
AV1
YPbPr
1
DVD / STB
This TV is capable of displaying 1080i, 720p and 480p DTV signals when
connected to a DTV tuner Set Top Box. Select the output of the Set Top
Box to either 1080i, 720p or 480p. A DTV signal must be available in your
DIGITAL
AUDIO
area.
IN
Connect the three separate component video cables 1 to the device
&
having component video outputs (YPbPr), such as Set Top Boxes, DVD-
players, laser-disc players, videogame players, satellite receivers or other
equipment, and to the
• Connect to the
• Connect to the
AV1
In case of a device with digital audio, connect the audio cable 2 to the
é
L & R
DIGITAL AUDIO OUT
TV or to your Home Cinema system.
In case of a device with analog audio, connect the audio cable to the
device's
3
&
Connect the device with RGB output with separate Horizontal and
Vertical sync to the
jacks of
é
Connect the audio cables to the
AV1
H & V
Notes
- If necessary, you can adjust the picture position to the center of the screen with
the cursor keys.
AV1
- The labels for the component video sockets may differ depending on the DVD
L & R
player or the device connected. Although the abbreviations may vary, the letters
3
B and R stand for the blue and red component signals, respectively, and Y
indicates the luminance signal. Refer to the DVD player's or devices instructions
for use for definitions and connection details.
- This television is designed to accept high definition signal standards 720p and
1080i as specified by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing
output standards which may cause difficulties for the television to properly
display.
- Due to possible digital image distortion when displaying signals from connected
digital equipment, and when having selected Digital STB in the Source menu,
see p. 16, automatically the Auto picture setting
menu, Auto picture, p. 19. Changing this setting during reviewing will not be
stored as
Warning
picture, or even combinations of these on your screen, check if the connections
are done in the correct way or move your digital device further away from your
TV.
Y , Pb and
Y , Pb and Pr jacks of
analog audio signals.
Y , Pb and Pr jacks of
digital audio signals.
of the device and to the
3 jacks and the
and
AUDIO L R
/ /
Pr R Pb B Y/G
2.
AV1
setting after switch off.
Personal
: in case you notice scrolling images, wrong colors or no color, no
Pr jacks of or on the TV.
AV1 AV3
in case of devices with
AV1
in case of devices with
AV3
DIG. AUDIO IN
and audio jacks of
L R
input 1 jacks and to the
H
3.
and jacks of
L R AUDIO AV1
is selected, see Picture
Soft
of the
.
AV1
and
V
33