D-Link DAP-1360 Quick Installation Manual page 4

Step 3: Begin Configuring your DAP-1360.
This configuration step presumes that you will use the DAP-1360's default
factory setting of operation mode of AP (access point). This mode allows
computers and devices equipped with 802.11n standard wireless LAN
interfaces to communicate with other wireless computers and devices through
the DAP-1360. In addition, the default factory setting provides no wireless
security. To set the DAP-1360 to another operation mode and to set its wireless
security, refer to its User's Manual.
Run a web browser on your computer.
The following login screen will appear:
In the Address field,
type in the default ip
address http://dlinkap
(or http://dlinkapxxxx
(the last four digits
of MAC address)).
Type Return.
Click Launch Wireless Setup Wizard to configure your access point.
4