turn off power and wait indicator light is off. Turn on power and TV can work.
It is needed to check the version o f the firmware for M T 8202 which has been
download into the Plasma T V .
Press Menu button o f the remote control, following input
control and OSD menu for Factory Setting is appeared on the screen .
Use the remote control and select the mode o f Firmware Version and then enter
the mode o f Firmware Version . It is easy to be found the version o f the current
firmware for M T 8202 is as the following : "Factory ID : P D P 4210E A 1_V X X "
1. P a r ts L ist
- Software upgrade board x 1 (#1)
- R S 2 32 null cable x 1 for PC (#2)
- R S 2 32 - V G A cable (#4)
- U SB cable x 1 (#5)
2. In s ta lla tio n f o r A T V u p g r a d e
2.1 C o n n e c t R S 2 3 2 c a b le (#2) to P C s e ria l p o r t
Quick Installation Guide
F o r
Software Upgrade Board
1 1 3 / 1 2 7
" 8202 " o f the remote