Table of Contents
Advertisement
24
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute this function to get best
3D L/R Invert
match of left/right image sequence to get the correct image
(for DLP 3D).
Choose "On" to display the 3D warning message.
3D Warning
Message
Choosing "Yes" returns the display parameters on this menu
Reset
to the factory default settings.
Note: Supported 3D signal timings:
Signal source type
Video/S-Video/Component
video
VGA/HDMI (PC mode)
HDMI (Video mode)
It needs correct settings on graphics card 3D application program for correct
3D display.
The SW players, such as Stereoscopic Player and DDD TriDef Media Player
can support 3D format files. You can download these players on the web
page below.
- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef-
3-D-Experience-4.0.2.html
Note: "3D L/R Invert" and "3D Format" are only available when "3D" is
enabled.
Supported timing
HQFS 3D (480i@60Hz), 576i@50Hz
640 x 480@50/60/100/120Hz
800 x 600@50/60/100/120Hz
1024 x 768@50/60/100/120Hz
1280 x 800@50/60/100/120Hz (RB)
HQFS 3D (480i@60Hz) , 576i@50Hz,
Frame Packing (1080p@23.98/24Hz,
720p@50/60Hz)
Side-by-Side Horizontal (1080i@50/60Hz,
1080p@50/60Hz)
Top-and-Bottom (720p@50/60Hz,
1080p@23.97/24Hz, 1080p@50/60Hz)
Advertisement
Table of Contents
