Entering Recording Mode; Recording; Utility - Pyle PTED06 Manual

Recording

Entering Recording Mode

1. Hold down [SAVE/RECORD]，LED Display will indicate "rEC",
which means recording mode is on.
2. Press [PAGE] to choose menus. Press [+] or [-] to adjust a
parameter. You can find further details in the following table:
Menu The Range of
parameter
UserSong U01~U05
Kit 1-55,U01-10
Song --- ,1-120
Beat 1-9
2 (half-notes)
Ryhthm
4 (quarter notes)
Type
8 (eighth notes)
3 (eighth note
triplets)
16 (sixteen notes)
Tempo 30-280
Recording
1. Under the recording mode, press [PLAY/STOP] or hit any pad
to start recording. LED Display will indicate the measure
number and 3 points on LED Display will blink at the tempo
you've set.
2. Press [PLAY/STOP] again to stop recording.
Note:
LED Display will indicate "FUL" and return to other mode if the
memory of module is full. You can record about 6500 hits at
most.

Utility

Press [UTILITY]，LED Display will indicate the parameter of
current menu.
Press [+] or [-] to adjust a parameter. Press [PAGE] to choose
menus.
You can find further details in the right table:
Note:
Pad Start allows you hit a pad to start a song. "PoN" means this
function is on. "PoF" means this function is off. Press
[PLAY/STOP] to stop a song.
12
Display Notes
Choose the song you want to
record with. "---"means
record without songs.
This menu will be skipped if
song is not ---.
This menu will be skipped if
song is not ---.
SAVE/
RECORD
PAGE
SONG
PLAY/
STOP
UTILITY
+
Menu The Range of parameter
EQ High 0-8
EQ Middle 0-8
EQ Low 0-8
Pad Start PoN/PoF
KIT VOICE
Display