Table of Contents
Advertisement
3. Connect the Power Cable.
Connect the power cord of the ME102 Wireless Access Point power adapter to the 5.0V DC power
socket on the rear panel of the access point. Then, plug the power adapter into an A/C power outlet.
Note:
Use only the power adapter supplied with the ME102 Wireless Access Point, otherwise the
ME102 may be damaged.
4. Check the setup.
Power l ght
i
The yellow
E hernet Link light
t
The green
data has been sent and received by the access point.
Wireless Link/Activity l ght
The yellow
access point is receiving or transmitting wireless data.
should be lit.
should be on. The Ethernet connection light also flashes to indicate that
i
should be on and blinking. A fast blink indicates that the
8
Advertisement
Table of Contents
