Table of Contents
Advertisement
Manual installation
This menu is used to store the programmes
one at a time or to add a programme to the
existing list.
From the
Installation
and
at the same time) :
Select
Manual installation
the up/down cursor to select and the left/right
one to adjust :
INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
SETUP
(only available in certain
Selection mode
countries) : permits selection of search mode
by
or by
Frequency
select
System :
Western Europe
Give name
This menu allows you to change or give a
name to the programmes and external
connectors. From the
(to select press
Select
Give name
Select the programme with the up/down
cursor and validate with
Use the left/right cursor to move around the
Favourite Programmes
This menu allows you to select the
programmes to be accessed with the
key. From the
Installation
press
and
at the same time) :
Select
Favourite Programmes
The list of favourite programmes is displayed.
The programmes that were stored at
installation will automatically appear on this list.
Setup Menu: see page 11
menu (to select press
and press
Manual installation
(Selection mode)
System
Programme no.
Search
Fine tune
Store
.
Channel
(BG
menu
Installation
and
at the same time) :
and press
.
.
menu (to select
and press
standard),
Great Britain
standard).
Programme number :
number using only the left/right keys.
. Use
Search :
programme is found, the scanning stops and
the name of the programme is displayed
(when available). Go to the next step. If you
know the frequency of the required
programme, this can be entered directly using
the
If no picture is found, see Tips (p. 12). See also :
EasyLink Function page 7.
Fine Tune :
the left/right cursor.
Store :
Repeat steps
store.
To exit, press
name display area (5 characters).
Use the up/down cursor to select the
characters.
Press
The programme name is stored.
Repeat steps
connectors to be named.
To exit, press
Use the up/downcursor to select the required
P
programme.
Use the left/right cursor to add or remove a
programme from the list.
.
Run through steps
programme to be added or removed from the
list.
To exit, press
(DK standard),
Eastern Europe
(I standard) or
enter the required
press
.The search starts. Once a
to
keys.
if reception is poor, adjust using
press
.The programme is stored.
to
for each programme to
several times.
when the name has been entered.
to
for all programmes or
several times.
and
several times.
(LL'
France
for each
5
Hide quick links:
Advertisement
Table of Contents
