Messages - HP AMD Radeon 7000 Installation Manual

# Include other Screen info here, including other SubSections
EndSection
The first Screen section maps the screen Screen 0–1 to the physical device ATI Radeon
7000 (0) Connector 1. The second Screen section maps the screen Screen 0–2 to the
physical device ATI Radeon 7000 (0) Connector 2. The third Screen section maps the
Screen 1–1 to the physical device ATI Radeon 7000 (1) Connector 1.
Once you have the Screen sections set up, you can set up the ServerLayout section. The
ServerLayout section uses the Identifier field that was defined for each of the Screen
sections. The ServerLayout section describes all of the screens used by the Xserver. The
ServerLayout section for this example follows:
Section ServerLayout
Identifier "Main Layout"
Screen 0 "Screen 0-1" 0 0
Screen 1 "Screen 0-2" RightOf
Screen 2 "Screen 1-1" RightOf
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
This ServerLayout has three (3) screens associated with it. These screens are accessed through
the 0.0, 0.1 and 0.2 displays. The first screen is associated with the Screen 0-1 section and is
the anchor screen (at location 0, 0). The second screen is associated with the Screen 0-2 section
and its screen coordinates are to the right of the first screen. The third screen is associated with
the Screen 1-1 section and its screen coordinates are to the right of the second screen.

Messages

Xserver messages are typically logged to /var/X11/Xserver/logs. The two files that contain
the messages are:
/var/X11/Xserver/logs/Xf86.*.log
/var/X11/Xserver/logs/Xstartup.*.log
Where * is the display instance of the Xserver, which is usually 0. The Xstartup.*.log file
contains messages from the X loader. The Xf86.*.log file contains messages from the Xf86
Xserver. The Xf86.*.log file is the file that should be checked first, should problems arise.
"Screen 0-1"
"Screen 0-2"
Messages 27