Related Manuals for MobileVision M115C
Summary of Contents for MobileVision M115C
- Page 1 Owner’s/Installation Manual 7” Color LCD Monitor Model: M115C For Technical Assistance, please call (800) 638-3600, or visit www.magnadyne.com...
-
Page 2: Table Of Contents
Warranty ........................... 8 Introduction Congratulations on the purchase of a quality MobileVision 7” LCD Monitor. This system has been designed to provide years of trouble free operation. The information enclosed provides a quick reference of the operations and maintenance of the new monitor. -
Page 3: Monitor Features And Controls
Monitor Features and Controls 1. IR Sensor: Receives signal from the 3. Video Select Button: Press to select a remote control. video source Aux 1 (RCA Input) and Aux 2 (Camera Input). 2. Power Button: Press this button to turn 4. -
Page 4: General Operation
General Operation Turning the Monitor On: The monitor is operational by activating the ignition key then manually pressing the power switch on the unit. Selecting the Input Source Press to select a video source Aux 1 (RCA Input) and Aux 2 (Camera Input). Note: When the vehicle is put into reverse the camera image will automatically override the video source image. -
Page 5: Technical Specifications
General Operation MENU Mode Adjustment To access the monitor display ratio menu, press the MODE SELECT remote’s MODE SELECT button. MENU To adjust the display ratio, press the MODE SELECT button on the remote. After adjustment has been made MODE SELECT wait 6 seconds and the pop-up menu will disappear. -
Page 6: Wiring Diagram
Wiring Diagram Rear View Camera (Model: C122 or C128 , Optional) 5-Pin Red Wire: 12 Volt Switched Black Wire: Ground Green Wire: Rear Camera Trigger Yellow RCA: Video In DVD Player (Optional) Red RCA: Audio Left In White RCA: Audio Right In Installation Instructions Pedestal Mounting the Monitor 1. - Page 7 Installation Instructions Flush Mounting the Monitor 1. Locate a suitable location for mounting the monitor (In-Dash, In-Wall, Headrest, etc.). Then cut a 7-1/2" (W) x 5" (H) opening and insert and secure the flush-mount housing. 2. After securing the housing, insert the monitor into the housing. Do Not Apply Pressure Directly to the LCD Monitor’s Screen.
-
Page 8: Warranty
This warranty gives you specific legal rights, and you may have other rights that vary from state to state. Copyright © 2017 MobileVision M115C-UM Rev. C 4-7-17...
Need help?
Do you have a question about the M115C and is the answer not in the manual?
Questions and answers