Setup Menu; Video Recorder, Dvd Or Satellite Keys - Philips 25PT7106/12R Product Manual

Setup Menu

Press and on the remote control at the
same time.
With the cursor, select
INSTALLATION
SETUP
Menu language
Country
Automatic installation
Digital Sources
Manual installation
Decoder/Descrambler
Give name
Information line
Reshuffle
Factory settings
Favourite programmes
Auto Surround *
SETUP
Installation
Use the cursor to adjust :
• if you have connected a digital
Digital sources :
peripheral (DVD, satellite receiver, ...), select
the corresponding connector :
or .
EXT2 None
• select the programme(s) that use the
Decoder :
external decoder then select the connector

Video recorder, DVD or Satellite keys

MODE
VCR
Y
AUX
SMART ACTIVE SMART
CONTROL
OK
MENU
+ +
MUTE
VOL P
- -
ZOOM
1 2 3
4 5 6
7 8 9
0
and press
SETUP
,
FRONT EXT1
Most of the audio and video equipment from our range of products can
be operated with the remote control of the TV.
The remote control is compatible with all video recorders and satellite receivers
using the RC5 standard and all DVDs using the RC6 standard.
To prepare for the first time the remote control for a DVD, press
simultaneously. Or to prepare for a satellite receiver, press
simultaneously.The setting is memorized for the
Press the
MODE
or (DVD or satellite receiver).The remote control indicator lights
AUX
up to display the selected mode. It switches off automatically after 20
seconds if left idle.The remote control automatically returns to TV mode.
The following keys are operational, depending on the equipment :
standby,
recording,
fast rewind,
stop,
play,
fast forward,
VCR timer,
DVD : title selection,
DVD : subtitle selection / VCR : tape list function,
menu,
cursor navigation and adjustments,
validation,
digit keys,
P programme selection,
audio selection.
OSD menu,
DVD :T-C function / VCR : index function.
where the decoder is connected :
. Press
EXT2
If the decoder is connected to the video recorder,
.
select the video recorder's connector (
•
Information line :
display of information on the programme (if
available).This information (name of channel or
broadcast) is displayed when the channels are
changed or by pressing
defined by the programme.
•
Factory settings :
factory picture and sound settings.
• Auto Surround
when this function is switched on, the
television set will automatically select Virtual
,
Dolby Surround sound when the identification
signal is being transmitted.
To exit, press
key to select the required mode :
EXT1
to return to the previous menu.
EXT2
to activate or disable the
.The content is
press to reset the
(only available on certain versions):
several times.
mode.
AUX
(video recorder)
VCR
or
).
and
and
11