The following remote control commands are applicable to Philips Business Display Solutions TV products. These can
be used for setup and configuration purposes.
WITH GUEST REMOTE CONTROL RC2888/01
(only when SECURITY in the TV SETUP MENU is set to STANDARD. Refer to page 11).
To activate TV SETUP MENU :
1
Select a channel number
2
Key in 7 4 3 0 6 8 followed by the
Note : All buttons (in step 2) on the remote control 7 4 3 0 6 8
within 20 seconds or else the TV Setup Menu will not be activated.
WITH REMOTE CONTROL RC2573GR (only in TV Commercial Mode).
To activate TV Setup Menu
1
F
Press the
button on the remote control to activate the TV Setup Menu.
Menu Items
Tuning Mode
Switch-On Options
Switch-On Channel
•
Volume
•
Picture Format
•
Power On
•
Security Options
Security
•
Control Options
ESP
•
• Source Menu Item
• Picture Format Menu Item
• Minimum Volume
• Maximum Volume
Captioning Options
• Save Captioning
Captioning
•
• Analog CC Mode
Service Menu
• Update Channel
• Allow Update Searching
• Start Firmware Update
• Restore Factory Settings
• Show Status
1)
To scroll through the menu, press Î or ï
indicates that the respective menu item's setting is selected for modification.
2)
To modify the setting of the selected menu item press Æ .
3)
To exit, press
ITV_Nafta.indd 10
ACTIVATING TV SETUP MENU
m button on the remote control.
m
must be pressed successively
TV SETUP MAIN MENU
Options
Air / Cable
Channel 1 - 125
Restore / Volume 0 - 99
Native / Widescreen
Standby / Forced / Restore
Standard / High
Hours : 0 - 99
Yes / No
Yes / No
Volume 0 - 99
Volume 0 - 99
Yes / No
On / On when muted / Off
CC1 - CC4 / TXT1 - TXT4
Channel : 0 - 125
Yes / No
on the remote control
on the RC2573GR setup remote control.
F
10
A highlight
.
2006-10-05 5:41:32 PM