Table of Contents
Advertisement
Safety Precaution & Installation
Attention To Installation
Change the position of the Drain Hose (For LOWER drain system only)
The ex-factory installation position of the drain hose is located at the spin side.
According to the installation site, the drain hose can also be installed at the wash
side of the machine. The method is as follows:
• Unplug the power cord and empty water in the drain hose completely.
• Spread a piece of soft cloth on the floor (e.g. a blanket) and place the washing
machine on it gently.
• Take the drain hose out from the buckle at the spin side, and put it into the
buckle at the wash side.
• Hang up the drain hose kit.
Installation Site
In order to avoid electrical failure, discoloration and deformation, do not install
the machine in the following places:
• Locations exposed to direct sunlight.
• Locations exposed to rain or snow
• Locations with uneven or unstable ground
Drain hose
Buckle
3
Front
Blanket
Advertisement
Table of Contents
