ECOSTAR WM12-600 Owner's Instruction Manual page 12

Maintenance
• Do not connect to the hot water supply.
• After using, be sure to unplug the power plug.
• Be sure to use plug that is properly grounded.
• The maximum gradient of the supporting surface for the washing machine should not exceed 2º.
• Do not tear down electrical wires and components in the machine by yourself.
• There are holes on the base for ventilation. These holes should not be blocked by foreign
objects (carpets, etc.).
• Never connect the grounding wire with the live wire, or it may lead to an electric shock.
• If the power cord is damaged, it must be replaced by a qualified person to avoid a hazard.
If the following symptoms occur, please disconnect the power plug and perform the following checks:
Symptom
The washing machine
does not work.
The drain hose does
not work.
There is abnormal
noise during washing.
There is abnormal
noise and violent
vibration during
spinning.
• Check that the power supply is in good condition.
• Check that the power plug is inserted properly.
• Check that the wash timer knob or the spin timer knob is not in the "0" position.
• Check that the drain hose is not laid too high.
• Check that the drain hose is not frozen.
• Check that the drain hose is not blocked by foreign matter.
• Check that there are no coins or any other foreign objects dropped into the
wash tub.
• Check that the washing machine is placed on flat, stable floor.
• Check that clothes are evenly distributed in the spin tub.
• Check that there are no washing materials or foaming debris dropped into
the outside of the spin tub.
10
Reason