Philips 22PFL3805H User Manual page 21

Manually adjust picture settings
1
Press .
2
Press to select [Setup] >
[Picture].
3
Press to select the following
settings.
• [Smart picture]: Accesses pre-defined
smart picture settings.
• [Video contrast]: Adjusts the intensity
of video contents, keeping backlight
unchanged.
• [Contrast]: Adjusts the intensity of
backlight areas, keeping video contents
unchanged.
• [Brightness]: Adjusts the intensity and
details of dark areas.
• [Colour]: Adjusts colour saturation.
• [Hue]: Compensates for colour variations.
• [Sharpness]: Adjusts sharpness in the
image.
• [Noise reduction]: Filters and reduces
noise in an image.
• [Tint]: Adjusts the colour balance in an
image.
• [Custom tint]: Customises tint setting.
(Only available if [Tint] > [Custom] is
selected)
• [Digital Crystal Clear]: Fine-tunes each
pixel to match surrounding pixels. This
produces a brilliant, high-definition image.
• [Dynamic contrast]: Enhances
contrast. A [Medium] setting is
recommended.
• [Dynamic backlight]: Adjusts
brightness of the TV backlight to
match lighting conditions.
• [MPEG artifact reduction]:
Smoothes out transitions on digital
pictures. You can switch this feature
on or off.
• [Colour enhancement]: Makes
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
• [PC mode]: Adjusts the picture when a
PC is connected to the TV via HDMI or
DVI.
• [Picture format]: Changes the picture
format.
• [Picture size]: Adjusts the viewing area.
(when set to maximum, you might see
noise or a rough edge of an image.)
• [Horizontal shift]: Adjusts the picture
horizontally for PC-VGA, DVI, HDMI or
YPbPr.
• [Vertical shift]: Adjusts the picture
vertically for PC-VGA, DVI, HDMI or
YPbPr.
Change picture format
1
Press .
»
A picture format bar appears.
2
Press to select a picture format.
»
The selected picture format is
activated.
3
Press OK to confirm your choice.
EN 19