Setting The Clock; Using The Rice Cooker - VITACLAY VF7900-3 Operating And Care Instructions

SETTING THE CLOCK

(1) Press "Hour" or "Minute" key and hold for a few seconds until the time display on the LCD is
flashing.
(2) Press "Hour" key until the correct hour is reached - release the key.
(3) Press "Minute" key until the correct minute is reached - release the key.

USING THE RICE COOKER

The Rice Cooking Function Key (5) cycles between regular rice, brown rice, sticky rice and reheat rice
options. Each option has a different micro computerized cooking mode which enables the cooker to
determine the cook time automatically based on the rice option you choose. A preset cooking time is not
required.
As a result of a fully sealed enclosure, it is not necessary to presoak rice before cooking. Simply rinse the
rice and place in the cooker with water. Recommended water to rice ratios are:
(a) Regular white rice such as sushi rice, jasmine rice, etc. - 1:1 (slightly more/less can be used if preferred)
(b) Sticky/sweet rice - 0.8:1 (water adjusted a little less than regular rice)
(c) Brown rice – 1.2-1.5:1 (more water can be added if preferred)
To start rice cooking immediately:
(a) Rinse rice thoroughly and place in the clay pot with the desired amount of water. Cover with clay
lid.
(b) Place the clay pot on the cooker's heating plate, turning the pot until it has good contact with the
bottom. Ensure there is no particle interference to prevent the cooker from cooking evenly.
(c) Close the cooker lid. You will hear a "click" when it is snapped in.
(d) Press rice cooking function key (5) to select type of rice. A "beep" will sound within a few
seconds to indicate cooking has started and the cooking indicator light will turn on.
(e) A few minutes before cooking is done, a "beep" will sound to indicate that the cooker has
automatically switched to the "Keep Warm" state and the rice is ready to serve.
To program rice cooking for a specified time:
(a) Repeat steps (a) to (c) above.
(b) Press Preset Timer Function Key (1).
(c) Press "Hour /Minute" function keys (2).
(d) Press rice cooking function key (5) to select type of rice. Within a few seconds, the LCD will
display the pre-programmed time, the cooker will begin cooking and you will hear a "beep"
indicating the cooking indicator light has turned on.
(e) A few minutes before cooking is done, a "beep" will sound to indicate that the cooker has
automatically switched to "Keep Warm" and the Warm/Cancel light will turn on. Once the cooker
enters the Warm mode, the rice is ready to serve.
7