VITACLAY VF7900-3 Operating And Care Instructions page 3

CLEAN UNIT THOROUGHLY BEFORE FIRST USE
•
Ensure the packing paper on the heating surface is removed.
•
Wash the clay pot and lid with warm water and a small amount of detergent.
•
Rinse and dry clay pot thoroughly before placing in the housing.
•
Plug the power cord into the unit first and then plug into the wall outlet. When the cooker is ready
for operation you will hear a long "beep".
•
Ensure the clock is set to the current time before using the Preset Timer key features (see
Function Keys).
Caution:
1. A slight odor and/or smoke smell may be noticed during the initial use of this appliance. This is
normal with many heating appliances and will disappear after the first few uses.
2. The cooker should be used for its intended purpose only and not for other cooking purposes such as stir
frying or deep oil frying.
3. If liquids have been soaking in the clay pot for a long time, a leak could occur. Use a dry towel to dry
the outside surface of the inner clay pot.
4. During the cooking process, the steam cap needs to be in place for safety and performance.
5. Do not touch the steam cap during cooking process as it becomes very hot.
6. The clay pot and lid become very hot during the cooking process and/or when cooking is finished. Use
the supplied steel hook or pot holders to pick up the clay pot and lid. Do not use bare hands.
3