Related Manuals for MFM BPX735
Summary of Contents for MFM BPX735
- Page 1 Petrol Powered Back-Pack Blower User Manual [Revision 2.0 October 2016] RETAIN THIS MANUAL FOR FUTURE REFERENCE PLEASE READ THIS MANUAL CAREFULLY BEFORE USE...
-
Page 2: Table Of Contents
Petrol Powered Back Pack Blower Table of Contents Safety ................................. 1 Included Items and Parts Identification ......................3 Set-Up ................................4 Operation ................................7 Starting and Stopping the Engine ........................7 Breaking-In ..............................8 During Operation ............................8 After Finishing Work ............................8 Maintenance and Storage .......................... -
Page 3: Safety
Petrol Powered Back Pack Blower Safety • Special safety precautions must be observed when working with the power tool. • It is important that you read, fully understand and observe the following safety precautions and warnings. • Careless or improper use of any blower may cause serious or fatal injury. −... - Page 4 Petrol Powered Back Pack Blower • Unit vibrations can cause an improperly tightened fuel cap to loosen or come off and spill fuel. − In order to reduce the risk of fuel spillage and fire, tighten the fuel cap. − On units with a screw cap: tighten the cap firmly by hand.
-
Page 5: Included Items And Parts Identification
Petrol Powered Back Pack Blower • Warning! When blowing: − To reduce the risk of inhaling poisonous fumes from chemicals and exhaust gases, do not operate the blower in confined spaces. − Walk forward only when the unit is running. −... -
Page 6: Set-Up
Petrol Powered Back Pack Blower Spark plug Carry handle Engine ON/OFF Switch Choke Throttle Air filter Fuel cap Priming bulb Exhaust Fuel tank Starter handle Set-Up Step 1: Attach the flexi tube 1. Place the flexi tube over the backpack air outlet. Tighten clamp ring with the multi-tool (or a 7mm hex socket). - Page 7 Petrol Powered Back Pack Blower Step 2: Attach the tubes 1. The tubes are connected in this order. 2. Tighten handle, ensuring it's in a suitable and comfortable position when in use.
- Page 8 Petrol Powered Back Pack Blower 3. Fit the nozzle into the extension tube. 4. Insert the nozzle into the tip (if desired). Once the engine is started, “wear” the blower as shown.
-
Page 9: Operation
Petrol Powered Back Pack Blower Operation Starting and Stopping the Engine Click to Watch: Starting a 2-Stroke... -
Page 10: Breaking-In
Petrol Powered Back Pack Blower Breaking-In A new machine should not be immediately run at high engine speeds, as the internal components need to “bed- in”. It is recommended to allow the engine to fully warm up before beginning to increase engine speed. For the first hour of engine use, avoid rapid changes in engine speed. -
Page 11: Carburettor
Petrol Powered Back Pack Blower or damaged, clean the filter with warm water and mild detergent and allow to dry, or fit a new one. Place a few drops of oil on the air filter element and squeeze it a few times to distribute the oil. •... -
Page 12: Minimum Wear And Avoiding Damage
Damage to the engine due to neglect or deficient maintenance, incorrect carburettor adjustment or inadequate cleaning of cooling air inlets. • Corrosion and other consequential damages resulting from improper storage. Specifications Model BPX735 Engine Type Petrol EURO 2 -2 Stroke Commercial Displacement 65cc Engine Speed... - Page 13 Petrol Powered Back Pack Blower Some experts believe the incorrect or prolonged use of almost any product could cause serious injury or death. For information that may reduce your risk of serious injury or death, consult the points below and additionally, the information available at www.datastreamserver.com/safety •...
Need help?
Do you have a question about the BPX735 and is the answer not in the manual?
Questions and answers