DISPLAYING PHOTOS / VIDEOS ON A TV
ATTACHING A STICKER PAD
The sticker pads are meant to be used to affix your
camera to smooth, hard, rigid surface. 3MTM stickers
provide highly resistant adhesion. However, the
precautions for affixing the pad must be respected.
Clean and dry the surface upon which you will be affixing the pad.
Î
Î
Make sure that the surface is as smooth as possible.
Î
Î
Affix the pad in a dry environment with a moderate temperature, preferably
Î
Î
indoors.
Let set for 24 hours before use.
Î
Î
NOTE: This pad cannot be used a second time, be can be cleanly removed by
heating with a hair dryer, for example.
PRECAUTIONS FOR USE
Handle the device with care. Do not drop or expose it to serious impacts.
Î
Î
For greater safety, do not touch the buttons while in use. Losing concentration
Î
Î
can be dangerous.
Do not disassemble this product as this could cause damage and void the
Î
Î
warranty.
Using this device in extreme cold (at temperatures below -10°C) could cause a
Î
Î
decrease in the battery's capacity, and hence reduce the product's battery life.
When diving or if using the camera for more than 30 minutes underwater at one
Î
Î
time, use the waterproof case (sold separately).
After using the camera in salt water, rinse it well with fresh water and dry it.
Î
Î
HDMI
Cable not provided
13
-10°C
45°C
-50°F
113°F