Cleaning Instructions; Maintenance - Nutrifaster Ruby2000 Mk iii User Manual

Because fruits and vegetables contain natural substances that will build up and stain
your filter if left unclean, it is important that you follow this set of cleaning instructions.
STEP 1. Find a suitable container that you can soak your filter in. It will be a good idea if you obtain one solely for
this purpose. Container size about 33cm in diameter and 23cm deep.
STEP 2. In about 4 Litres of hot water dissolve 250grams (1 cup) of DET10* Cleaner/Sanitiser (or) dishwashing
detergent such as Cascade or other specified by supplier.

For best results, it's important to ensure to make a fresh batch of solution each week
STEP 3. Rinse your filter under a stream of water removing as much of the pulp stuck to it as possible. Place the
filter directly into the solution. It is important that you do not scrub or brush the filter with any abrasive cleaning
aids. Allow it to soak overnight.
STEP 4. In the morning thoroughly rinse the filter.
STEP 5. Follow these instructions after each day of business to avoid build up on your filter.
Note: you may also clean the blade, nut and collection pan in this solution to remove build up and staining.
*DET10 Cleaner/Sanitiser can be purchased from Nutrifaster (10kg drum)
POINTS TO CONSIDER
 Do not leave your filter in an area where it can be damaged.
 Do not wash it along with your pots, pans or other cooking utensils. This can often
damage the filter basket.
 Do not scrub or brush the filter with any abrasive cleaning aids
 If your filter basket is not cleaned and maintained your juicer will not function properly.
 If during the day you are stopping to empty pulp from within the filter too frequently,
your cleaning procedures must be reviewed. If you experience continuous clogging, then
is best for you to contact an authorized service technician.
 Do not leave water or juice on the top of the motor hub. Over a period of time this liquid
can make its way into the bearings damaging them.

MAINTENANCE

 You should have your machine serviced at least once a year. Like most things if you
have your juicer serviced regularly, expensive repairs may be avoided.
 Your blade over time will wear out. The blade can be re-sharpened for better yield.
 Your juicer should only be serviced by an authorized technician.
 Do not alter your Ruby juicer in any way or form. This will void any warranty.
 Bearings do not require lubrication.

CLEANING INSTRUCTIONS: