Table of Contents
Advertisement
The messages which are programmed by SP-182 will be displayed under certain specific conditions. In the auto
preset condition, the default messages "WARN MESSAGE# xx" are displayed.
WM-#1
PRINTER ERROR: Unplug AC cord and check the printer. Then plug AC cord.
WM-#2
INPUT FIGURE OVER LIMITATION
Press CL key. (PLU HALO can be released temporarily by using HALO RELEASE key)
It is displayed when total amount exceeds the amount limitation of EFT terminal.
WM-#3
CLERK IS NOT SIGNED ON
WM-#4
ITEM OR MEDIA (SLIP) VALIDATION IS COMPULSORY
Print item or media validation by ITEM/MEDIA VALIDATION key.
(can be released temporarily by using OFF COMPULSORY key)
TOTAL (SLIP) VALIDATION IS COMPULSORY: Print total validation by TOTAL VALIDATION key.
WM-#5
(can be released temporarily by using OFF COMPULSORY key)
WM-#6
Dot Printer: VALIDATION PAPER HAS NOT BEEN INSERTED INTO ECR
It is displayed only when [SF-10.c=1] is set.
WM-#7
Dot Printer: VALIDATION PAPER HAS NOT BEEN REMOVED FROM ECR
It is displayed only when [SF-10.c=1] is set.
WM-#8
MESSAGE INPUT IS COMPULSORY
(can be released temporarily by using OFF COMPULSORY key)
WM-#9
PERFORM FOREIGN CURRENCY SUBTOTAL DISPLAY OPERATION
Press F.C. SBTL key and F.C. MEDIA key.
WM-#10 NUMBER OF PERSONS INPUT IS COMPULSORY
(can be released temporarily by using OFF COMPULSORY key)
WM-#11 SBTL KEY DEPRESSION IS COMPULSORY BEFORE TENDERED AMOUNT INPUT
(can be released temporarily by using OFF COMPULSORY key)
WM-#12 TAX TABLE IS NOT PRESET: Enter tax amount manually. Preset tax table.
WM-#13 TENDERED AMOUNT INPUT IS COMPULSORY
(can be released temporarily by using OFF COMPULSORY key)
WM-#14 DRAWER IS OPEN
This message is displayed only when the factory optional 'drawer open sensor' is being used.
WM-#15 CASH DECLARATION IS COMPULSORY
(can be released temporarily by using OFF COMPULSORY key)
WM-#16 REGISTRATION BUFFER IS ALMOST FULL: Prepare to close the transaction.
WM-#17 PLU STOCK IS ZERO OR NEGATIVE
Enter stock by programming. Displays only if programmed.
(can be released temporarily by using HALO RELEASE key)
WM-#18 Dot Printer: JOURNAL PAPER NEAR END
Replace with new paper roll.
(only at the beginning of transaction, it can be released temporarily by using OFF COMPULSORY key)
WM-#19 ECR TO ECR RAM DATA TRANSFER ERROR
Check the cable connection between ECR & ECR. Refer to INTERFACES & PERIPHERALS MANUAL for
details.
WM-#20 CLERK iBUTTON IS REMOVED
Insert previously removed clerk iButton.
WM-#21 SLIP PRINTER IS BUSY
Press CL key and wait for the printer to be ready. Press 'PRINT' on the printer to proceed with the slip.
WM-#22
NOT USED
WM-#23 RECEIPT PAPER END
Replace with new paper roll. Dot Printer: While the paper is replaced, only RPF key can be pressed. Press X2
key to start printing. It is displayed only when [SF-10.b=1] is set for dot printer.
WM-#24 JOURNAL PAPER END
Replace with new paper roll. Dot Printer: While the paper is replaced, only JPF key can be pressed. Press X2
key to start printing. It is displayed only when [SF-10.a=1] is set for dot printer.
WM-#25 Thermal Printer: THERMAL PRINTER IS OVERHEATED
Please wait until the head cools down.
WM-#26 Thermal Printer: THERMAL PRINTER HEAD IS RELEASED
Close the paper roll cover by pressing down the surbased area.
WM-#27 SHORT TENDERING AMOUNT INPUT OF TTL 25 PROHIBITED
WM-#28 SIMPLE CONDIMENT PLU ENTRY IS PROHIBITED
Main PLU not entered yet.
VIII.
WARNING MESSAGES
122
Hide quick links:
Advertisement
Table of Contents
