Page 1
Operating Instructions (EN) MODELS: 30'' Disk 34'' DIisk 29'' Cylindrical 33'' Cylindrical 28'' EDGE 32'' EDGE Read these Instructions before using the machine. Read these Safety Messages before using the machine. Scan With Phone for more Information www.tomcatequip.com 1711 South Street Racine, WI 53404 (USA) (800) 450-9824 | (+001) 262-681-6470 VERSION 16.224...
INTRODUCTION This manual is furnished with each new machine. This manual will allow the Operator to get the best performance out of your RPS manufactured Scrubber-Drier, Sweeper, Burnisher, or Orbital Scrubber. Read this manual thoroughly before operating or servicing the machine. This machine will provide excellent performance, but the best results will be obtained at the most minimum costs if: •...
SAFETY MESSAGES You will see four kinds of safety reminders in this manual: DANGER WARNING DANGER indicates a hazardous situation which, if not WARNING indicates a potentially hazardous situation avoided, will result in death or serious injury. which, if not avoided, could result in death or serious injury. NOTICE CAUTION NOTICE indicates information considered important, but...
Page 5
WARNING WARNING The Batteries in this machine produce hazardous Dress safely. Do not wear rings or metal wrist watches voltage which can cause electrical shock, burns and/ when servicing this machine, as they can cause an or electrocution. Always disconnect Batteries before electrical short circuit which can cause serious burns.
DANGER SAFETY LABELS Read and obey all Safety Labels on your HERO Floor Scrubber. If you have questions about these labels, ask your super- visor. These images indicate where on the HERO Safety Labels are located. If ever the labels become illegible, worn off, or torn, promptly report it to your supervisor and replace it.
LCD SCREEN SCREEN #1 (OPERATOR) SCREEN #2 (MAINTENANCE) SCREEN #3 (WITH ERROR CODE) ** USE GREEN MENU SELECTION BUTTON ON CONTROL PANEL TO CHANGE SCREENS ** 1. BATTERY LEVEL INDICATOR - Indicates the energy level remaining in the Batteries (Shown on all menu displays) 2.
BATTERY SETUP NOTICE Batteries are a possible environmental hazard. Consult your Battery supplier for safe disposal methods. NOTICE Orientation of Batteries is critical for cables to reach. Ensure proper torque values when installing batteries. (Between 8 - 12 ft/lbs) 24 VOLTS TC-HERO-OP-EN - 9 -...
FILL SOLUTION TANK < 30 Gal. ( 113.6 l ) < 30 Gal. ( 113.6 l ) < 130°F / 54°C < 130°F / 54°C DANGER CAUTION EXPLOSION RISK! Flammable materials can cause an TO AVOID DAMAGE TO THIS MACHINE: •...
BATTERY CHARGERS Console / WET / Domestic Chargers: AC Power IN: 120VAC / 60Hz DC Power OUT: 24VDC / 30A Please refer to OEM Charger Operating Instructions for more information. Onboard / AGM / International Chargers: AC Power: 80-270VAC / 50-60Hz DC Power OUT: 24VDC / 27A Please refer to OEM Charger Operating Instructions for more information.
COMMON WEAR PARTS ROUND DISK BRUSHES: ROUND DISK PADS: NOTICE NOTICE The ## in Disk Column Denotes Desk Pad Size: 15'' or The ## in Disk Column Denotes Desk Pad Size: 15'' or 17'' 17'' DISK PADS DISK LEVEL COLOR BRUSHES DISK LEVEL...
Need help?
Do you have a question about the Hero 30'' DISK and is the answer not in the manual?
Questions and answers