Function for service
Function
Displayed the operating time of the lamp
Reset the operating time of the lamp
Displayed the operating time of the projector
When replacing the lamp, Reset the operating time of lamp.
Reset the lamp timer :
Please carry out the following operation within 10 minutes from power on, if you replaced the lamp after 2,000 hours.
1) Press the RESET button on projector for 3 seconds or
remote control transmitter TIMER button for 3 seconds and
display the total lamp used time.
2) Press the RESET button on projector or remote control
transmitter MENU ON button during displaying the lamp
used time.
3) Select the "0" on the screen using the MENU ( ) button or
DISK PAD.
1,2
3
1
-- 5 --
Operation
Press the RESET button of the projector or the TIMER
button of the remote control, for 3 seconds.
Press the RESET button of the projector or the remote
control MENU.
(During be displayed the operating time of the lamp.)
Press the MUTE button of the projector or the remote
control, for 3 seconds.
(During be displayed the operating time of the lamp.)
2
LAMP 1700 hr
LAMP 1700
CP-X270W
3
0
CANCEL