Remote Control Transmitter; Loading The Battery - Hitachi CPX270W Service Manual

CP-X270W
STANDBY/ON Button
MAGNIFY
MAGNIFY
MAGNIFY

Loading the Battery

CAUTION
Danger of explosion if battery is incorrectly replaced.
Be careful in handling the battery according to instructions of the accompanying manual "SAFETY
INSTRUCTIONS" and this manual.
Replace only with the same or equivalent type recommended by the manufacturer.
Use the 3V micro lithium battery type no. CR2025 only.
When you dispose the battery, you must obey the law in the relative area or country.
Keep the battery away from children and pets.
First Loading:
In original packing, the battery is installed in the battery holder of the
remote controller with protection film(the transparent filmsome of
which is inside the battery folder). Pull out the protection film to load
the battery.
Replacing:
1. See the reverse side of the remote controller.
2. Pinch the groove and pull out battery holder as the drawing right.
3. Remove the worn battery.
4. Install the new battery with "+" side facing.
5. Push in and click the battery holder.
Button
Button
Button
Button
MENU Button
Button
Button
Button
AUTO Button
TIMER Button
Battery Holder

REMOTE CONTROL TRANSMITTER

-- 4 --
VIDEO Button
RGB Button
MENU SELECT Button
RESET Button
POSITION Button
VOLUME Button
VOLUME Button
FREEZE Button
MUTE Button
BLANK Button
"+" side
Pull out
Battery Holder