Advertisement
Quick Links
INSTRUCTION MANUAL
226KG (500LB)
TIPPER TOWED TRAILER
Model No: THGT500-A -- Product No: 193843001
ASSEMBLY REQUIRED
SAVE THESE INSTRUCTIONS
SPARES & SUPPORT: 01793 333212
Please read & understand this manual, paying particular attention to the safety instructions,
before use.
The manufacturer reserves the right to change the product specification and livery
according to continued product improvements.
Images used are for illustration purposes only
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for The Handy THGT500-A
Summary of Contents for The Handy THGT500-A
- Page 1 INSTRUCTION MANUAL 226KG (500LB) TIPPER TOWED TRAILER Model No: THGT500-A -- Product No: 193843001 ASSEMBLY REQUIRED SAVE THESE INSTRUCTIONS SPARES & SUPPORT: 01793 333212 Please read & understand this manual, paying particular attention to the safety instructions, before use. The manufacturer reserves the right to change the product specification and livery according to continued product improvements.
-
Page 3: Table Of Contents
CONTENTS SAFETY INSTRUCTIONS SPECIFICATIONS CONTROLS & FEATURES OPERATING INSTRUCTIONS MAINTENANCE & STORAGE COMPONENTS ASSEMBLY PARTS DIAGRAM & LIST WARRANTY ASSEMBLY IS REQUIRED This product requires assembly before use. See the “Assembly” section for instructions. Please check that all parts required for the assembly of this spreader are included. If for any reason you believe a part for the assembly is missing or damaged, please contact us. -
Page 4: Specifications
SPECIFICATION The manufacturer reserves the right to change the product specification and livery according to continued product improvements. Model THGT500-A Product Number 193843001 Weight 38.7kg Working Width 81cm Internal Dimensions 97cm x 71.5cm x 30.5cm Maximum Capacity 500LB (226kg) Wheel & Tyre 16”... - Page 5 CRUSH AND CUT HAZARDS STORE IDLE EQUIPMENT Always keep your hands and feet clear from When not in use, the machine should be stored moving parts while operating. Always keep the in a dry location. Keep the machine away from work area clean and clear when operating.
- Page 6 COMPONENTS Please check the contents of the carton are correct BEFORE assembling your new product. If any parts are missing, contact our Customer Service Team • Telephone: 01793 333212 • Email: customerservice@handydistribution.co.uk TOOLS REQUIRED • Pliers • Screw Driver – Phillips Head •...
-
Page 7: Assembly
ASSEMBLY Remove the hardware pack and all loose parts from the carton and verify that all the components are included. If you are missing any parts, please contact us on 01793 333212 for assistance. STEP 1 - Attach the Bottom Panels and Support Tubes •... - Page 8 STEP 3 - Attach the Wheel Axle Support • Connect the two-wheel axle supports and attach them to the bottom panels using eight M8 lock nut & screw M8x16. • Hand tighten the nuts. STEP 4 - Attach the Release Pedal •...
- Page 9 STEP 5 - Attach the Wheel Axle • Insert the tow bar assembly into the central slot in the wheel axle support. • Insert the axle through the hole and slide it through both the axle support and the Tow Bar assembly.
- Page 10 STEP 7 - Attach the Rear Panel Slots and Lock Support Tube 1. Attach the left and right rear panel slots on the left and right panel using four sets of the M6x16 screws and M6 lock nuts. STEP 8 - Attach the Side Panel •...
- Page 11 STEP 9 - Attach the Front Panel • Attach the front panel to the bottom panel and secure using two hinge pins. • Lock the left and right side panel assemblies in place using the top handles. STEP 10 - Attach the Rear Panel •...
- Page 12 CONTROLS & FEATURES CAUTION Read & follow all instructions for assembly & operation. Failure to properly assemble this equipment could result in serious injury to the user of bystanders, or cause equipment damage. Familiarise yourself with the location & function of the controls and features. Keep the manual in a safe place for future reference.
- Page 13 OPERATION / ADJUSTMENT DANGER The product must only be put into operation if no defects are found. It is crucial that defective parts are replaced before the product is used again. Check the safety equipment and the safe condition of the product: Check all parts to make sure that they fit tightly. Check whether there are any visible defects: broken parts, cracks, etc.
- Page 14 MAINTENANCE WARNING Improper maintenance & storage of the trailer may void your warranty. MAINTENANCE • After each use clean any material out of the Trailer. • Rinse/dry inside and outside of the Trailer after each use. • Before operating make sure the tyres have the recommended tyre pressure of 25 PSI (Do not exceed).
-
Page 15: Parts Diagram & List
PARTS DIAGRAM & LIST... -
Page 16: Parts List
PARTS LIST Part No. Description Part No. Description TH177-1 Left Bottom Panel TH177-22 Draw Bar Support TH177-2 Right Bottom Panel TH177-23 TH177-3 Wheel TH177-24 Handle A TH177-4 Wheel Axle Support TH177-25 Handle B TH177-5 Left Side Panel TH177-26 Handle Sleeve TH177-6 Right Side Panel TH177-27... - Page 17 GJ HANDY & CO LTD USER WARRANTY POLICY Users Statement of Warranty Each new machine is warranted against defective material or assembly of material under normal usage. The warranty applies to the original purchaser and covers faulty parts and the labour involved in replacing and repairing those parts, which are of original manufacture.
- Page 18 GJ HANDY & CO LTD USER WARRANTY POLICY Not covered by this warranty a) The warranty policy does not cover any depreciation or damages caused by ordinary wear, rusting or corrosion, lack of correct maintenance or operation, misuse, abuse, lack of transportation or accident.
-
Page 20: Tel: 01793 333212
For spares or support of your handy product, please contact us: Tel: 01793 333212 (Mon – Fri 8.00am to 5.30pm excl. Bank Holidays) Email: customerservice@handydistribution.co.uk To see our range of garden machinery & equipment visit: www.thehandy.co.uk Making gardening easier & affordable since 1938 Distributed by Handy Distribution, Murdock Road, Dorcan, Swindon, SN3 5HY...
Need help?
Do you have a question about the THGT500-A and is the answer not in the manual?
Questions and answers