Table of Contents
Advertisement
4.2. Record a continuous voice message
As an alternative of keeping a button pressed during a record, you may start a continuous
recording. Push and hold the "Rec" button and then additionally press "Play" after a short
"click". The device will acknowledge the start of the continuous recording with the sound
sequence "low pitched-high pitched". To terminate the continuous recording, press the
"Rec" button again. The device will acknowledge the end of the continuous recording with
the opposite sound sequence "high pitched-low pitched". Furthermore continuous
recordings can be paused with "Play" and with a further push on "Play" again continued.
4.3. Listen to a recorded voice message
To listen to a voice message press "Play" after recording. If you have several messages
use the arrow button to select a voice message.
Hint: You have the possibility to jump to the last or the first file within a folder. Therefore
push and hold "Right arrow" and in addition press "Play" to reach the last file or push an
hold "Left arrow" and in addition "Play" to jump to the first file.
4.4. Erase a voice message
Milestone 212 enables you to delete voice messages directly without a connection to the
computer. Therefore play back the file you would like to erase. While the message is
playing, press and hold down the "Mode" button and briefly press "Play" button in addition.
The file will be erased as you let go off the buttons. An erasing signal will appear as an
acknowledgment. A message may be erased while it is being replayed or up to 10 seconds
after playback has stopped.
4.5. The 5 recording folders
Milestone 212 has 5 folders on the internal memory wherein you can record your voice
messages. By default Milestone 212 stores the recordings in folder "M1".
4.5.1. Change between the folders
To change the folder push an hold "Selector", then in addition press one of the 5 front
buttons. When releasing the buttons you jump inside the dedicated folder. So each front
button is directly linked to one folder. For example the button combination "Selector" and
"Mode" leads to folder M5 and "Selector" and "Right arrow" leads to folder M4.
4.5.2. Voice labeling of folders
Push and hold "Rec" to start recording a name for the current folder and after a click in
addition press "Mode" continuously. Milestone announces "folder" and then you start
recording your desired folder name. To stop recording release both buttons and you will
hear the sound sequence "high pitched-low pitched". The new folder name is announced
the next time you choose this folder. A recorded folder name can be re-recorded anytime.
Hint: Be aware that you can delete recorded folder names with Milestone 212. Erasing of a
file is usually done by selecting a file and using the combination "Mode" and "Play". A
record for a folder can not be selected the usual way. Therefore please re-record a folder
name to activate the file and afterwards press the erase combination "Mode" and "Play".
10
/15
Advertisement
Table of Contents
