QED AP4+ Operation Manual page 39

Specifications - Top Inlet, Long
+
AP4 T
Pump Dimensions
x x x x x x x x x x x x x x x x x Liquid Discharge
x x x x x x x x x x x x x x x x x
x x x x x x x x x x x x x x x x x
x x x x x x x x x x x x x x x x x
Application Limits (Base model)
AP4+ AutoPumps are designed to handle
the application ranges described below.
For applications outside these ranges,
consult QED about AP4+ upgrades.
Maximum Temperature:
pH Range: 4-9
Solvents and Fuels: diesel, gasoline,
JP1-JP6,#2 heating oils, BTEX, MTBE,
land ll liquids
Consult QED for higher ow requirements
*
Inlet
Air Supply
Exhaust
O.D. 3.6" (91 mm)
180 °F (82 °C)
Speci cations & Operating Requirements
Model
Liquid Inlet Location
Overall Length (Pump & Fittings)
Weight
Maximum Flow Rate
Pump Volume/Cycle
Minimum Accuation Level
Standard Pump
Maximum Depth
Air Pressure
Air Usage
High Pressure Pump
Maximum Depth
Air Pressure
Minimum Liquid Density
Standard Construction Materials¹
Pump Body
Pump Ends
Internal Components
Tube & Hose Fittings
Fitting Type
Tube & Hose Options
Tubing Materials¹
Sizes - Liquid Discharge
Pump Air Supply
Air Exhaust
Hose Material
Sizes - Liquid Discharge
Pump Air Supply
Air Exhaust
Applies to QED supplied tubing;
1
other tubing sources may not
conform to QED ttings.
Long and short AP4+ AutoPumps are warranted for
ve(5) years: Low-Drawdown AP4+ AutoPumps are
warranted for one (1) year.
36
4" - Long AP4+ Top Inlet
Top
O.D. 3.6 in. (91 mm)
56.7 in. (144 cm)
16.5 lbs. (7.6 kg)
10 gpm (38 lpm)* - See Flow Rate Chart
0.58 - 0.78 gal (2.2 - 3L )
53.3 in. (135 cm)
250 ft. (76 m)
5 - 120 psi (0.4 - 8.4 kg/cm2)
0.35 - 1.1 scf / gal. (3.0 - 8.4 liter of air /
uid liter) - See air usage chart
425 ft. (130 m)
5 - 200 psi (0.4 - 14.1 kg/cm2)
0.7 SpG (0.7 g/cm3)
Fiberglass or Stainless Steel
Stainless Steel
Stainless Steel, Viton, PVDF Hastelloy-C
,
Brass or Stainless Steel
Barbs, Quick Connects or Easy Fittings
Nylon
1 in. (25 mm) or 1 -1/4 in. (32 mm) OD
1/2 in. (13 mm) OD
5/8 in. (16 mm) OD
Nitrile
3/4 in. (19 mm) or 1 in. (25 mm) ID
3/8 in. (9.5 mm) ID
1/2 in. (13 mm) ID