Table of Contents
Advertisement
Quick Links
Specifications
Guaranteed Minimum Power
1KHz(EIA) with 0.5
THD
4
STEREO (per channel)
8
STEREO (per channel)
8
bridge mono
Channel
Performance
Frequency Response (at 1 Watt)
Total harmonic Distortion (THD)
Power voltage
Power consumption
Power Connector
Output Grade (Technology Type)
Voltage Gain
Damping Factor
S/N Ratio (20Hz-20Khz,4 Ohms)
Crosstalk
Input sensitivity
Input impedance(nominal)
Balanced
Unbalanced
Connectors,Controls and Indicators
Input Connectors
Output connectors
Front Panel Controls
Output mode switch for mono, stereo or bridge selection
Rear Panel Controls
Three LED lights for every channel. Clip/-10dB,
LED Indicators
signal and Mono/bridge/Status lights in front panel.
Cooling system
Construction
Protection against short circuit, direct output current,
Protection
over load, low voltage and over-heat
Ventilation
Dimensions (WxHxD)
Net Weight
Shipping Weight
Accessories
Page 11
www.newhank.com
D series Power Amplifiers
D2000
D2000
D1000
D1000
2x500W
4x500W
2x300W
4x300W
1000W
2x1000W
2 channel
4 channel
20Hz-20KHz,+0/-1dB
0.2%
220-240V~50/60Hz
680W
1360W
Standard IEC connector
Class D
40dB
300 (8 ),10Hz-400Hz
100dB
-65dB
0.775V
10K ohms
20K ohms
XLR socket ( female)
SPEAKON
Power on/off switch and Volume Control
Cooling fans with variable speed
Flow-through ventilation from front to back
483x44x350mm
483x44x350mm
4.95kg
6.30kg
7.65kg
6.30kg
Operation manual 1pc,power cord plug 1pc
Models: D1000,D2000
CLIP
-10dB
SIGNAL
D1000
D1000
STATUS
-inf
0
MONO
BRIDGE
CH1
CLIP
-10dB
SIGNAL
D2000
D2000
STATUS
-inf
0
-inf
0
-inf
MONO
BRIDGE
CH1
CH2
POWER
-inf
0
CH2
ON/
OFF
CLIP
POWER
-10dB
SIGNAL
STATUS
0
-inf
0
MONO
BRIDGE
ON/
OFF
CH3
CH4
Advertisement
Table of Contents
Related Manuals for Newhank D1000
Summary of Contents for Newhank D1000
-
Page 1: Specifications
20Hz-20KHz,+0/-1dB Frequency Response (at 1 Watt) Total harmonic Distortion (THD) 0.2% Power voltage 220-240V~50/60Hz Power consumption 680W 1360W Models: D1000,D2000 Standard IEC connector Power Connector Output Grade (Technology Type) Class D Voltage Gain 40dB Damping Factor 300 (8 ),10Hz-400Hz S/N Ratio (20Hz-20Khz,4 Ohms) -
Page 2: Important Safety Instructions
D series Power Amplifiers D series Power Amplifiers Important Safety Instructions Mono Wiring D1000 WATCH FOR THESE SYMBOLS: 1. Read these instructions. 2. Keep these instruction. Parallel Wiring Using the Speakon Connectors 3. Heed all warnings. The lightning bolt triangle is used to alert the user to the risk of electric shock. -
Page 3: Protection Functions
4. Alternating Input socket o be connected with suitable alternating electric power via the power cord. Page 7 Page4 www.newhank.com www.newhank.com... - Page 4 D series Power Amplifiers D series Power Amplifiers Bridge Wiring D1000 Bridge-Mono Wiring Using the Speakon Connectors Bridge-mono mode doubles the output power of the amplifer. Content Index 1. See the following. On the back panel, set the Output Mode switch to BRIDGE.
-
Page 5: Product Features
D series Power Amplifiers D series Power Amplifiers Stereo(Dual) Wiring D1000 1. See the following figure. On the back panel, set the Output Mode Switch to STEREO. 2. Wire the speakers to the Speakon connectors as shown. PRODUCT FEATURES D series are the Class-D digital power amplifiers that are entirely designed by the manufacturer specially for up-rising demand to thin and light amplifier from the users. - Page 6 The STATUS light will turn to orange color. The amplifier will turn to normal work status after about 4 seconds and the STATUS light will turn from orange to green. All the other CLIP POWER -10dB SIGNAL D1000 D1000 STATUS -inf -inf MONO BRIDGE indicator lights will lighten up to show the live mode.
Need help?
Do you have a question about the D1000 and is the answer not in the manual?
Questions and answers