Cleaning - Norelco T 760 Owner's Manual

Cleaning

Always switch Trimmer OFF before cleaning.
Do not use abrasives, scourers or liquids such
as alcohol, benzene, bleach or acetone to clean
the Trimmer.
Never clean, remove or replace Guide Comb
Attachment with motor ON.
Do not apply pressure to cutters.
Do not touch cutters with hard objects as this
may damage them.
Do not use while bathing, showering or
immerse the Trimmer in water or other liquids
as damage to Trimmer may occur.
During Use:
If cut hairs have accumulated in the Guide Comb
area, turn Trimmer off, pull Guide Comb
Attachment off Trimmer and remove hairs by
shaking and/or blowing.
Once A Week:
1 Make sure the Trimmer is switched OFF
and disconnected from the electrical
outlet.
2 Remove the Guide Comb Attachment.
C
3 Open the cutting unit.
ENGLISH 11