Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MilDef Crete RW11
Summary of Contents for MilDef Crete RW11
- Page 1 WORKSTATION COMPUTER RW11 User’s Guide...
- Page 2 They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. Copyright © 2016 MilDef Crete Inc. Trademarks All other brand and product names are trademarks or registered trademarks of their respective companies.
- Page 3 FCC (Federal Communications Commission) Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 4 Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Regulatory Information/ Disclaimers Installation and use of this computer must be in strict accordance with the instructions included in the user documentation provided with the product.
- Page 5 Products with the CE Marking comply with both the EMC Directive (2014/30/EU) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: EN55032 Class B EN55024 EN61000-4-2, EN61000-4-3,...
- Page 6 CE Declaration of Conformity It is confirmed to comply with the requirements set out in the Council Directive on the approximation of the laws of the member states relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2006/95/EC), the Amendment Directive (93/68/EEC), and the procedures given in European Council Directive (99/5/EC and 2004/108/EC ).
- Page 7 Power Conservation This computer consumes much less power than other conventional computers. However, power consumption may be further reduced by configuring the Power Management Setup. It is highly recommended to enable power-saving functions when operating this computer, as Power Management functions do not impact system performance while saving power.
- Page 8 Battery Precautions Only use batteries designed for this computer. Wrong and incompatible batteries may cause explosion, leakage or damage to the computer. Do not remove the battery from the computer while it is powered on. Do not continuously use a battery that has been dropped, or that appears damaged (e.g.
- Page 9 Environmental Information, Material Safety & Recycling All materials used in the manufacturing of this equipment are recyclable or environmentally friendly. Please recycle the packing materials in accordance to local regulations at the end of the product's service life. Notice: The equipment may contain insignificant amount of hazardous substances for health and environment below control level.
-
Page 10: Table Of Contents
TABLE OF CONTENTS CHAPTER ONE - GETTING STARTED........1 ....................1 NPACKING ..................2 UICK PERATION ................3 PPEARANCE VERVIEW CHAPTER TWO - OPERATING INFORMATION ......9 ....................9 ORKPLACE .................... 9 UGGEDNESS ....................10 OWER ON ............... 10 NSTALLING PERATING YSTEM POST ................ - Page 11 (R) R ........31 NTEL APID TART ECHNOLOGY USB C ............. 31 ONFIGURATION IT8783F S IO C ........32 UPER ONFIGURATION RF D ........33 EVICE ONTROL ONFIGURATION USB CHARGE C ............34 ONTROL ............34 ATTERY ECALIBRATION (R) S ........
- Page 12 USB3.0 (F 7) ..............46 INDOWS ) ............46 MART EADER PTIONAL CHAPTER SIX - SPECIFICATIONS ........... 47 ....................47 LATFORM CPU ....................... 47 PCH ....................... 47 ....................47 EMORY ....................47 RAPHIC ....................47 ISPLAY ....................48 EYBOARD ....................48 OUCHPAD ....................
-
Page 13: Chapter One - Getting Started
Getting Started Chapter One - Getting Started Unpacking The following components are shipped along with your computer. If any component is missing or damaged, please contact the dealer immediately. Computer Unit AC Adapter AC Power Cord Utility DVD ... -
Page 14: Quick Operation
Getting Started Quick Operation Open the battery cover, insert the battery, and secure the battery cover by tightening the screw. Connect the AC adapter with the computer and charge the battery for at least 10 minutes. Turn ON the computer by pressing the power button. Primary Battery (Left Side) Secondary Battery (Right Side) Note:... -
Page 15: Appearance Overview
Getting Started Appearance Overview LCD Panel Open 1. Embedded Antennas (Optional): GPS, WiFi/Bluetooth x 2 2. Embedded Mic 3. LED Indicators Power Indicator : Battery Indicator : Green (Power) / Charging (Orange) / Battery Flashing Green (S3) low (Flashing Orange) SSD/Heater Indicator: Green (SSD) / Orange (Heater) - Page 16 Getting Started Right View Battery Pack Optional 3 SATAII SSD (Top) Optional 4 SATAII SSD (Bottom) USB 2.0 x 2 Optional GLAN x 1 GLAN x 1 Note: Please use shielded RJ45 LAN cable for LAN connection. Chapter One - 4...
- Page 17 Getting Started Left View 1. Audio/Line-in/Microphone 2. USB 3.0 3. USB 3.0 (Fast Charging) 4. Standard 1 SATAIII SSD (Top) Optional 2 SATAIII SSD (Bottom) 5. Primary Battery Pack Chapter One - 5...
- Page 18 Getting Started Rear View 1. DC-In Conn. (Military 2 pin conn.) 2. Display port 3. VGA port 4. Serial DB9 x 2 (COM1~2) Optional Serial DB9 x 2 (COM3~4) 5. Kensington Lock Chapter One - 6...
- Page 19 Getting Started Front Side 1. Optional smart card reader Chapter One - 7...
- Page 20 Getting Started Bottom View 1. Optional 2nd Fan 2. Fan 3. D/U port Note: Optional 2 Fan will be installed when RW11 is with optional Graphics card. Chapter One - 8...
-
Page 21: Chapter Two - Operating Information
Operating Information Chapter Two - Operating Information Workplace A clean and moisture-free environment is preferred. Make room for air circulation. Remember to avoid areas from: Sudden or extreme changes in temperature. Extreme heat. Strong electromagnetic fields (near television set, motor rotation area, etc.). -
Page 22: Power On
Operating Information Power on Simply press the power button to turn on the computer. Note: Press and hold the power button for 5 Seconds could force the computer to shutdown For those with the optional LCD heater: ℃ Usually, when Heater warm up LCD to +5 , then the computer will turn on. -
Page 23: Sleep/Hibernate
Operating Information works and close the applications to prevent your SSD from suffering possible data loss or damage. “Shut down” will turn OFF power of your computer. If you want to start your computer again, you need to turn it ON again by pressing the power button. -
Page 24: Touchpad
Operating Information Note: Intel® Rapid Storage Technology Driver should be installed and it can be found in Utility DVD. Please refer to the User Guide from Intel official website for setting up the function. There are two kinds of User Guide, “Intel® Rapid Start Technology User Guide for UEFI Mode”... -
Page 25: Keyboard
Operating Information Note: For capacitive multi-touch touchpad, please install the driver for complete functions. Without installing the driver, you can still use single-touch functions, but multi-touch functions and touchpad icons on system tray are not available. In addition, if the driver is not installed, the touchpad disabled setting will not be kept after S3/S4/reboot/turn off. -
Page 26: Managing Solid Static Drive (Ssd)
Operating Information Managing Solid Static Drive (SSD) RW11 has 4 slots for 2.5” type/ 7mm height SATAII/III SSD. One SSD was pre-installed as the standard configuration. You can have the additional SSD installed, up to 4 SSD1 & SDD2 at Left side SSD3 &... -
Page 27: Rtc
Operating Information Note: It is recommended using the same brand/size SSD to configure the RAID volume. Please refer to the official User Guide from Intel website for the detail setting information. Battery backed up RTC (Real Time Clock/Calendar) is built in an on-board CMOS (Complementary Metal Oxide Semiconductor) chip. -
Page 28: Wireless Devices (Optional)
Operating Information Wireless Devices (Optional) For your convenience, you can turn on/off your wireless devices through the proprietary software application - “Device Power Manager”. Note: Depending on the configuration of your computer, Device Power Manager menu may be shown differently from the screenshots provided in this section. - Page 29 Operating Information Bluetooth Driver & Application Installation Install the Bluetooth driver first. Read from the Utility DVD and find the directory listed in the readme file to finish installation. Install the Device Power Manager application. Read from the Utility DVD and find the directory listed in the readme file to finish installation.
- Page 30 Operating Information Click “GPS” to enable the GPS function (click again to disable). Note: Wireless devices can be turned ON/OFF through BIOS. Once a device is turned off through BIOS, its button displayed on the Device Power Manager will turn out to be yellow with a prohibition marker, which means end-user has no right to use this function.
-
Page 31: Handle
Operating Information Handle The detachable handle is put aside before shipping. It can be found in accessories package. You could install the handle for easily carrying. The procedure is as below. 1. Removing the Handle Cover Plug Handle Cover Plug <P1> Screw <S1>... - Page 32 Operating Information a. Insert the Handle into the slot of case. <H1> * b. Set the 2 Handle Cover Brackets. <B1> * c. Fix the Handle using 2 screws. <S1> Screw tightening torque: 12+/- 2kgf.cm *Notice: Ensure the Handle groove and screw hole match. Align the handle cover bracket to the hole, and then use a screwdriver to insert Chapter Two - 20...
-
Page 33: Smart Card Reader (Optional)
Information Smart Card Reader (Optional) RW11 has a smart card slot, with an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. -
Page 34: Chapter Three - Managing Power
Managing Power Chapter Three - Managing Power AC Adapter The AC adapter performs two functions: It powers the computer from an external AC source. It charges the computer battery. The adapter automatically detects the AC line voltage (100V or 240V) and adjusts accordingly. -
Page 35: Battery
First priority (Right) Optional Multi Battery Charger (MCRW) A Multi Battery Charger is designed for the battery of RW11, with this charger, you could charge two battery packs at one time. Battery Gauge You may check battery status from battery gauge in Windows. Click the power/battery icon to reveal the battery gauge window. -
Page 36: Battery Recalibration
Managing Power Battery Power Saving Tips The computer comes with an intelligent power-saving feature. You may extend the battery life by: Setup power saving functions in Operating System Power Management options (e.g. Windows Power Options). Lower the screen brightness(By pressing [Fn] + [F3]) ... - Page 37 Managing Power The recalibration is now processing. You can see the following recalibration status on the screen: Calibration Frequency: How many times the calibration is processed Battery Capacity: Current battery capacity Battery Charge Mode: Charge/Discharge Battery Learning Mode: Normal (charge)/Learn (discharge) 6.
-
Page 38: Power Conservation
Power LED indicator is OFF. USB 3.0 Fast charging RW11 provides one USB 3.0 fast charging port, which means that you can have faster charging than traditional standard USB 3.0 port. The following table shows details for USB 3.0 Fast Charging information: Mode USB3.0 Fast Charging port Features... -
Page 39: Chapter Four - Bios Setup
BIOS Setup Chapter Four - BIOS Setup Press [F2] at boot up to enter BIOS setup. Use arrow keys to select options and [+/-] to modify them. When finished, move to “Exit” and press [Enter] then confirm save by pressing [Y]. Main Menu Aptio Setup Utility Main... -
Page 40: Advanced Menu
BIOS Setup Advanced Menu Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Trusted Computing ► Trusted Computing Setting ► SATA Configuration ► Intel (R) Rapid Start Technology ► USB Configuration ► IT8783F Super IO Configuration →← : Select Screen ►... - Page 41 BIOS Setup Feature Options Description Intel Smart Disabled Intel Smart Connect Technology Connect Settings Enabled Technology Intel(R) Smart Disabled Intel(R) Smart Connect Technology Connect Setting Enabled Technology Network Stack Disabled Network Stack Setting Configuration Enabled Intel 82579LM NIC Configuration Configure Gigabit Ethernet device Gigabit parameters Blink LEDs (range...
-
Page 42: Trusted Computing Sub-Menu
BIOS Setup Trusted Computing Sub-Menu Aptio Setup Utility Advanced Enables or Disables BIOS Configuration support for security device. Security Device Support [Disabled] O.S. will not show Security Device. TCG EFI protocol Current Status Information and INT1A interface will not be available. →←... -
Page 43: Intel (R) Rapid Start Technology Sub-Menu
BIOS Setup Intel (R) Rapid Start Technology Sub-Menu Aptio Setup Utility Advanced Enable or disable Intel Intel (R) Rapid Start Technology [Disabled] Rapid Start Technology →← : Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &... -
Page 44: It8783F Super Io Configuration Sub-Menu
BIOS Setup Feature Options Description should be claimed by XHCI driver. EHCI Hand-off Disabled This is a workaround for OSes without EHCI hand-off support. Enabled This EHCI ownership change should be claimed by EHCI driver. IT8783F Super IO Configuration Sub-Menu Aptio Setup Utility Advanced Set Parameters of Serial... -
Page 45: Rf Device Control Configuration Sub-Menu
BIOS Setup Feature Options Description COM 1 Mode RS232 Change COM port Setting Settings RS422 TTL 1 RS485 RF Device Control Configuration Sub-Menu Aptio Setup Utility Advanced RF Device Control Setting RF Device Control GSM STATUS Present [Enabled] GPS STATUS Present →←... -
Page 46: Usb Charge Control Sub-Menu
BIOS Setup USB CHARGE Control Sub-Menu Aptio Setup Utility Advanced USB CHARGE Setting USB CHARGE Control USB CHARGE Control [Enabled] →← : Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &... -
Page 47: Intel (R) Smart Connect Technology Sub-Menu
BIOS Setup Intel (R) Smart Connect Technology Sub-Menu Aptio Setup Utility Advanced Enable/Disable ISCT ISCT Configuration [Disabled] Confiquration →← : Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Intel (R) Smart Connect Technology Selections You can make the following selections on the Intel (R) Smart Connect... -
Page 48: Network Stack Configuration Sub-Menu
BIOS Setup Network Stack Configuration Sub-Menu Aptio Setup Utility Advanced Enable/Disable UEFI Network Stack [Enabled] Network Stack Ipv4 PXE Support [Enabled] Ipv6 PXE Support [Enabled] PXE boot wait time →← : Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults... -
Page 49: Intel 82579Lm Gigabit Network Connection Sub-Menu
BIOS Setup Intel 82579LM Gigabit Network Connection Sub-Menu Aptio Setup Utility Advanced Click to configure the PORT CONFIGURATION MENU network device port NIC Configuration Blink LEDs (range 0-15 seconds) PORT CONFIGURATION INFORMATION UEFI Driver: Intel PRO/1000 5.0.12 →← : Select Screen Adapter PBA: FFFFFF-OFF ↑↓: Select Item... - Page 50 BIOS Setup INTEL 82574L Gigabit Network Connection Sub-Menu Selections You can make the following selections on the Intel 82574L Gigabit Network Connection sub-menu. Feature Options Description NIC Configuration LINK Speed Change link speed and duplex for current port. Wake on LAN Blink LEDs (range Blink LEDs for the specified 0-15 seconds)
-
Page 51: Chipset Menu
BIOS Setup Chipset Menu Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit PCH Parameter ► PCH-IO Configuration ► System Agent (SA) Configuration →← : Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &... -
Page 52: Pci Express Configuration Sub-Menu
BIOS Setup PCI Express Configuration Sub-Menu Aptio Setup Utility Chipset Enable or disable PCI PCI Express Configuration Express Clock Gating for each root port PCI Express Clock Gating [Enabled] DMI Link ASPM Control [Enabled] PCIe-USB Glitch W/A [Disabled] Subtractive Decode [Disabled] →←... -
Page 53: Boot Menu
BIOS Setup Boot Menu Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Select boot mode Boot mode select [UEFI] LEGACY/UEFI FIXED Boot ORDER Priorities Boot Option #1 [Hard Disk] Boot Option #2 [CD/DVD] →← : Select Screen Boot Option #3 [USB CD/DVD] ↑↓: Select Item... -
Page 54: Security Menu
BIOS Setup Security Menu Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Password Description Administrator Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. -
Page 55: Save & Exit Menu
BIOS Setup Save & Exit Menu Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Exit system setup after Save Changes and Exit saving the changes Discard Changes and Exit Save Changes and Reset Discard Changes and Reset →←... -
Page 56: Chapter Five - Drivers And Applications
Drivers and Applications Chapter Five - Drivers and Applications The Utility DVD includes all the drivers for the devices installed in your workstation computer. Please consult your dealer if there is any driver missing. Also, you could update the driver or check if there any driver needs to be installed by "Windows device manager". -
Page 57: Wireless Power Manager
Drivers and Applications Wireless Power Manager Please refer to the ”readme.txt” file from the Utility DVD for the Wireless Power Manager installation. Touch Pad Please refer to the ”readme.txt” file from the Utility DVD for the Touch Pad driver installation. Turbo Boost Monitor Please refer to the ”readme.txt”... -
Page 58: Gps (Optional)
Drivers and Applications GPS (Optional) Launch the "Wireless Power Manager" to turn on the GPS device, and then please refer to the ”readme.txt” file from the Utility DVD for the GPS driver installation. TPM1.2 (Optional) Please make sure that TPM device is enabled in the BIOS, and then please refer to the ”readme.txt”... -
Page 59: Chapter Six - Specifications
Specifications Chapter Six - Specifications Platform Intel® Chief River Platform Intel® 3 Generation Quad Core i7-3610QE Processor CPU runs at multiple speeds depending on the CPU type and operating system. Also, CPU speed switches automatically by detecting AC adapter/ battery operation and busy state. -
Page 60: Keyboard
Specifications Keyboard Number of keys: 87 Keys (standard 87-key with backlight) Key Travel: 1.4 ± 0.2 (mm) Caps Lock LED (Green) Touchpad Type: Standard: Multi-touch Capacitive Touchpad Optional: Single Resistive Touchpad Interface: PS/2 Storage 2.5” (Removable) ... -
Page 61: Power
Specifications Rear: DC-in Connector x 1 (Military 2-pin) Display port x 1 VGA x 1 Standard: Serial DB9 x 2 (COM1~2) Optional: Serial DB9 x 2 (COM3~4) Bottom: D/U port x 1 Power Battery Pack (BRWB3A) : ... -
Page 62: Materials And Recycling
Specifications Materials and Recycling Materials of the computer are as follows: Plastic Case: Recyclable UL grade PC + ABS GE C2800 or C6200 Aluminum Case: AL6061T6 Bracket: Aluminum 5052 Bumper: Silicon Rubber, TPU PCB: FR-4, UL 94V0 ... -
Page 63: Chapter Seven - Optional Devices
Gigabit LAN: 1Gbps (internal Mini PCIe Card) Memory Add Memory Modules to improve your system performance. The RW11 has 4 DDR3L SO-DIMM slots, supporting 4GB or 8GB DDR3L 1600 memory. You could add up memory to 32GB (8GB Memory Module x 4) -
Page 64: Smart Card Reader
Smart Card Reader Accept a smart card for additional security feature. Multi Battery Charger (MCRW) The Multi Battery Charger is designed for the battery of RW11, with this charger, you could charge two battery packs at one time. Electronic characteristics ... -
Page 65: Chapter Eight - Maintenance And Service
Maintenance and Service Chapter Eight - Maintenance and Service Cleaning ALWAYS to turn OFF the power, unplug the power cord and remove the battery before cleaning. The exterior of the system and display may be wiped with a clean, soft, and lint-free cloth. - Page 66 Maintenance and Service Clearly mark the outside of the shipping box with the RMA #. If RMA # is not present on the shipping box, receiving will be unable to identify it and it might be returned. Unless prior arrangements have been made, the customer is responsible for all shipping costs.
Need help?
Do you have a question about the RW11 and is the answer not in the manual?
Questions and answers