Trimming; Trimming With Acu•Control Guide Comb - Norelco T660 Brochure

Trimming

Use this Trimmer for its intended household
use as described in this manual.
Always comb the beard and/or moustache with
a fine comb before you start trimming.
If you are trimming for the first time, be careful.
Do not move the Trimmer too fast. Make
smooth and gentle movements.
Trimming with ACU•CONTROL
Guide Comb Attachment
Guide Comb Attachment must be on Trimmer
in order to use Hair Length Selector.
C
1
Slide the Hair Length Selector to the
desired trimming length setting (see table).
4
The setting will appear in the window in
the center of the Guide Comb Attachment
If you are trimming for the first time, start by
using the maximum trimming length setting #4
to prevent accidentally trimming hairs too
short. As you become familiar with the settings,
adjust Hair Selector to desired trimming length.
Selector will "click" into position at each setting.
2 Switch the Trimmer ON.
C
3 To trim in the most effective way, move
the Trimmer against the direction of hair
growth. Make sure the surface of the
Guide Comb always stays in contact
with the skin.
NOTE: Since all hairs do not grow in the same
direction, you may want to try different trimming
positions (i.e., upwards, downwards, or across).
Practice is best for optimum results.
ENGLISH 7