Piping Connection - LG ATNH126ELFB Service Manual

Piping Connection

1. Form the piping according to its routing. Avoid bending and bending back the same piping point more than
three times. (This will result in hardening the pipe.)
2. After deforming the piping, align centers of the union fitting of the indoor unit and the piping, and tighten them
firmly with wrenches.
3. Connect pipe to the service valve or ball valve which is located below the outdoor unit.
4. After completing the piping connection, be sure to check if there is gas leakage in indoor and outdoor connec-
tion.
Welding
Elbow
AUUH7280
Welding
Welding
Elbow
Elbow
AUUH10080
Elbow
AUUW4860AUUW6060
Installation
Service Manual 55