Tesco KENNY Instructions Manual

KENNY DOUBLE BEDFRAME
Before You Start
•
Important: Retain these instructions for future reference.
•
When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area
for assembly.
•
Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to
prevent it from scratching.
•
Check the pack and make sure you have all the parts listed.
•
Tools not included.
•
Do not use power tools to construct this product.
•
Due to the size of this product we recommend that it is assembled in the room intended for use.
•
Ensure that this product is fully assembled as illustrated before use.

Warnings

•
This product is intended for a maximum weight of 100 kg. Do not exceed this weight.
•
It is recommended that 2 people are required to assemble this product.
•
Do not stand on the product.
•
This product should only be used on firm, level ground.
•
Make sure the legs remain in contact with the ground.
•
Keep small parts out of reach of children.
•
Check all screws or bolts are tightened and inspect regularly.
•
Do not tighten screws until fully assembled.
•
Do not overtighten screws or bolts.
•
Do not use this product if parts are missing, damaged or worn.
•
Do not allow children to jump on the bed as this could cause damage to the frame.
•
Because of the size of this unit, we recommended that it is built in the room intend for use.

Care Instructions

•
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as
they can bleach or damage the product.
•
Never use scourers, abrasives or chemical cleaners.
1