Clas Ohlson MTH-09F01-UK Instruction Manual

Table Tower Fan
Art.no 18-2683 Model MTH-09F01-UK
36-4776 MTH-09F01
Please read the entire instruction manual before use and save
it for future reference. We reserve the right for any errors in text
or images and for making any necessary technical changes to
this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety
• This product information should be read carefully before
using the product. Failure to adhere to these safety
instructions may lead to fire, short circuiting, or a life-
threatening situation. Save the instruction manual for
future reference.
• Check that all parts are present and undamaged when
unpacking the product.
• Make sure that the adaptor's power rating is compatible
with the mains current from the outlet you are using.
• Never use the product if the flex, adaptor or any other part
is damaged or is not working properly. Never try to repair
or modify the product on your own. Contact a qualified or
approved repairman.
• This fan is only to be used indoors and in a dry and clean
environment. Never place the fan or adaptor close to baths,
swimming pools, or containers full of liquid into which it
might fall.
• Always pull out the adaptor plug when the fan is not in use.
• Never leave children or pets unsupervised while using the fan.
• Never expose the fan to water or extreme damp.
Never leave the fan near open flames, cookers, heaters or
other hot surfaces.
• Never place any objects on top of the fan and make sure
that foreign objects do not enter the fan since this can
cause short circuiting, electric shock, or fire hazard.
• Never turn the fan off by pulling the lead from the socket.
Make sure that the on/off switch is set to 0 and then pull out
the adaptor plug.
• Never use the fan in areas where petrol, solvents or other
flammable liquids are stored or used.
GREAT BRITAIN • for consumer contact, please visit www.clasohlson.co.uk and click on customer service.
• Place the fan on a dry flat surface but not too close to walls,
curtains, etc.
• Never expose the adaptor lead to sharp edges or corners
and does not present a risk for tripping over. Never place
the lead under a mat or similar obscuring objects.
Product description
Oscillating table tower fan with three speeds.
1. Table tower fan
2. LED function indicator light
3. Function selector buttons
4. Base
5. Power adaptor (12 V 1000 mA,
centre positive)
Functions
On-Off switch.
Speed control I – II – III.
Oscillation switch.
LED indicator
Symbol is lit when the fan is on.
Lit when fan is at its lowest
fan setting.
Lit when fan is at its medium
fan setting.
Lit when fan is at its highest
fan setting.
Lit when fan is in
oscillation mode.
Use
1. First plug the adaptor's DC plug into the fan and the other
end into a wall socket.
2. Place the fan on a dry level surface.
3. Press the power switch
4. Press to select the desired speed. The fan will retain
the same speed setting when restarting. The selected fan
speed is shown by the lit LED indicator (2).
5. Press
1
evenly spreading airflow over a wider area. Press again to
deactivate the oscillation mode.
6. Press the power switch
Cleaning
• First turn off the fan and pull out the adaptor's DC plug.
• Use only a damp cloth when cleaning; never use strong
cleaners or solvents.
• Use a vacuum cleaner and clean through the openings in
the grille to remove dust if needed.
Disposal
2
3
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local authority.
4
Technical data
5
Power supply
Power
to start the fan.
if you wish to activate the oscillation mode for
to stop the fan.
Primary 100–240 V AC, 50–60 Hz
Secondary 12 V DC
8.5 W