Adding Printers In Windows Nt Using The Microsoft Lpr Monitor - Axis 5600 Plus User Manual

Adding Printers in Windows
Client/Server Printing
Alternative Method for

Adding Printers in Windows NT using the Microsoft LPR Monitor

26
Downloaded from www.Manualslib.com
Select Network printer instead of Local Printer in Step 2 above if your
print server has already been installed by the administrator on another
computer. Follow the instructions in the Add Printer Wizard to complete
the installation.
Important!
• Make sure that the Automatically detect and install my Plug and Play printer checkbox
is not checked
• Press F1 to access the Windows online help system if you need additional help when
installing a printer/print server using this method.
If you wish to print over LPR but do not wish to install Print Services for
LPR Printing
Unix you can do this by changing the printing protocol after having
installed the printer using the Standard TCP/IP method, see "Adding
printers in Windows 2000 / XP / 2003 using Windows Add Printer
Wizard" on page 22 for instructions.
Once the printer is installed, follow these instructions to change the
printing protocol:
1. Go to Start | Settings | Printers
2. Double-click the installed printer.
3. Select Properties
4. Click the Ports
5. Click the Configure Port
6. Click the LPR
7. Click OK OK to finish.
OK OK
If you have not already done so, you should perform the TCP/IP basic
setup procedures prior to installing a printer for LPR printing.
Preparing for In the Control Panel, double-click the Network icon. Select the Services
LPR Printing
tab. If the TCP/IP Printing entry appears, then TCP/IP is already installed.
Close the Network folder and go on to Installing an LPR printer, below.
First, prepare for LPR printing:
1. Open the Control Panel
2. Select Protocols
3. Add TCP\IP Protocol TCP\IP Protocol TCP\IP Protocol. TCP\IP Protocol
4. Select Services
5. Add Microsoft TCP\IP Printing Microsoft TCP\IP Printing.
Microsoft TCP\IP Printing Microsoft TCP\IP Printing
manuals search engine
Start | Settings | Printers.
Start | Settings | Printers Start | Settings | Printers
Properties from the Printer Properties Properties Printer menu. Printer Printer
Ports tab.
Ports Ports
Configure Port button. Configure Port Configure Port
LPR radio button and enter the queue name (PR1, PR2...). LPR LPR
Control Panel and double-click the Network Control Panel Control Panel
Protocols.
Protocols Protocols
Services Services. Services
Network icon. Network Network
AXIS 5400+ / AXIS 5600+ User's Manual