Axis 5600 Plus User Manual page 11

Network Indicator
Power Indicator
Printer compatibility
Configuration and
AXIS 5400+ / AXIS 5600+ User's Manual
Downloaded from www.Manualslib.com
Printer Ports
Parallel port: One 36-pin Centronics connector. Highspeed IEEE 1284
AXIS 5400+
compliant with ECP support and throughput of 1 MB/sec.
Two Parallel ports: 25-pin DSUB connector. Highspeed IEEE 1284
AXIS 5600+
compliant with ECP support and throughput of 1 MB/sec.
One Serial port: 9-pin DSUB connector, RS-232, XON/ XOFF or RTS/CTS,
data rates up to 115,200 baud
Test Button
The test button is used for:
• Printing a test page to check the connection to the printer.
• Printing the parameter list showing the print server settings.
• Performing a Factory Default of the print server, which will restore most
of the parameters and settings to factory default values.
See The Test Button, on page 126 for details.
The network indicator flashes to indicate network activity.
The power indicator is lit while power is applied. If it is not lit, or if it
flashes, there is a problem with the print server or its Power Adapter.
All printers can be used except host-based printers (also known as CAPT,
GDI, PPA or Windows-based printers).
The print server can be configured and managed from its internal Web
Management pages, using HTTP as well as HTTPS in the secure mode. These Web pages
offer you a platform independent management tool that is suitable for all
supported network environments. See Using a Web Browser for Print
Server Management, on page 83 for details.
manuals search engine
Product Overview
11