Whirlpool 3SWED5205SQ1 Use And Care Manual page 19

2.
Remove bottom screws
Open dryer door. Remove bottom screws from dryer
cabinet side of hinges. Loosen (do not remove) top
screws from dryer cabinet side of hinges.
3.
Lift door off top screws
Lift door until top screws in dryer cabinet are in large part
of hinge slot. Pull door forward off screws. Set door (handle
side up) on top of dryer. Remove top screws from dryer
cabinet.
4.
Remove screws from hinges
Remove screws attaching hinges to door.
5.
Remove screws from door
Remove screws at top, bottom, and side of door (4 screws).
Keep door screws separate from hinge screws as they are
different sizes. Holding door over towel on dryer, grasp
sides of outer door and lift to separate it from inner door.
NOTE: Do not pry apart with putty knife or screwdriver.
Do not pull on door seal or plastic door catches.
6.
Rotate outer door
Take outer door and rotate in 180º and set it back down on
inner door. Be certain to keep cardboard spacer centered
between doors. Reattach outer door panel to inner door
panel so handle is on the side where hinges were just
removed. Insert 4 door screws.
7.
Flip door over
Flip door over so handle side is down.
19