Shaving Legs; Shaving Underarms - Philips Norelco HP6326PB Product Manual

6.
3 Place Razor in Charging Base (Fig. 3).
4 Recharge Indicator Light on base will light to indicate
Razor is (re)charging.
5 Charging requires 8 hours.This Razor, model HP6326PB,
is for cordless shaving only.
6 Razor may be continuously charged in its base (with
base connected to electrical outlet) for a maximum
of 4 weeks.At the end of 4 weeks, you must allow the
battery to totally deplete charge before recharging.
B To deplete charge, shave in usual manner; however,
do not recharge Razor between shaves. Continue to use
Razor until battery is totally depleted.
7 You may then keep Razor continuously charging for
another 4-week period before you must once again
allow Razor to totally deplete charge.
IMPORTANT: Before placing Razor in base, be certain
Razor is in Off ("O") position.With Razor in the base, the
recharge light will light with Razor in either the On or Off
position. However, your Razor will only recharge if Razor is
turned Off (Fig. 3).

SHAVING LEGS

1 Prepare legs for wet or dry shaving (see BEFORE
USING YOUR NEW PHILIPS RAZOR).
2 To shave legs, press the small Safety Button in the center
of the Bodyselect Switch and push the switch down to
the position.This turns the Razor On (Fig. 4).
B Keep small Safety Button on Switch depressed while
sliding Switch.
3 Hold the Razor so that Shaving Head is in full contact
with your skin. Shave with smooth, steady strokes,
against the direction of hair growth (Fig. 5).
B Pressing too hard may cause skin irritation.
B Practice is best for optimum results.
4 To turn Razor Off, depress small Safety Button in the
center of the Bodyselect Switch and push the switch up
to the center, Off, position.

SHAVING UNDERARMS

1 Prepare underarms and other sensitive areas for wet
or dry shaving (see BEFORE USING YOUR NEW
PHILIPS RAZOR).
2 To shave underarms and other sensitive areas, press
the small Safety Button in the center of the Bodyselect
Switch and push the switch up to the
turns Razor On (Fig. 6).
B Keep small Safety Button on Switch depressed while
sliding Switch.
7.
position.This