Cruise Control System - Hyundai Genesis Coupe 2011 Quick Reference Manual

DRIVING
TIRE PRESSURE MONITORING SYSTEM (TPMS)
LOW TIRE PRESSURE INDICATOR
Illuminates if one or more of your tires is significantly under-inflated.
TPMS MALFUNCTION INDICATOR
Illuminates when there is a malfunction with the TPMS system. Inspect all
tires and adjust tire pressure to specification. If the lamp remains
illuminated, have the system checked by an authorized Hyundai dealer as
soon as possible.
CRUISE CONTROL SYSTEM (if equipped)
To set a cruising speed
1. Press ON/OFF button and the CRUISE indicator will illuminate in the
instrument cluster. Accelerate to desired cruising speed (above 25 mph).
2. Press set button and remove your foot from the accelerator pedal.
To accelerate or decelerate
Press RES + button
to increase set cruising speed.
Press SET – button
to decrease set cruising speed.
To cancel cruising speed
Press CANCEL button , or press brake pedal, or press ON/OFF
28 I Quick Reference Guide
Low Tire Pressure Indicator
TPMS Malfunction Indicator
Cruise indicator
Cruise set indicator
.
ENGINE START/STOP BUTTON (if equipped)
With the ignition OFF, press the engine start/stop button:
Once for ACC (Accessory) mode.
Twice for ON mode.
Three times for OFF.
To start the engine in any mode (including OFF, push the engine start/
stop button while pressing the brake pedal (Automatic transmission)
or clutch pedal (Manual transmission).
To shut the engine OFF, place shift lever in P (Park – automatic
transmission)/ Neutral (Manual transmission) and push the engine
start/stop button again.
Emergency situations
Shut off engine while driving
Press engine start/stop button for more than 2 seconds or press it
3 times consecutively within 3 seconds.
Restart engine while driving
Press engine start/stop button with shift lever in N (Neutral).
HYUNDAI GENESIS COUPE
Quick Reference Guide I 29