Maintenance And Setting; Protective Cover; Self-Check Of Quadcopter; Setting A Remote Control Stick - Xiaomi Mi Drone Instructions Manual

1. Propeller
Propeller is one of parts, that easy wear. If you find signs of wear of
propeller, replace it promptly. Otherwise, it will have a negative impact on
the use of quadcopter normally.

2. Protective cover

Protective cover is one of parts, that easy wear. If you find signs of wear of
propeller, replace it promptly.
Safety Tips: Protective cover provides limited protective effect. Operator
must operate in accordance with safety regulations, direct the unit away
from people, animals and other items.
3. Battery
Do not put a battery in fire; don`t hammer battery. The capacity of the
lithium battery at low temperatures is significantly reduced. Do not use it at
temperatures below 50C.

4. Self-check of quadcopter

On every switch on the quadcopter performs some self-test operations. If
self-test failed, you will find appropriate notification to the app.
5. Compass setting
If magnetic field has changed, you need to re-adjust a compass for safe
flight. If you need to set a compass, open the app and find the relevant
notification and instructions.
6 Remote control code
When replacing the remote control or kvadrokoptera you need to re-
synchronize the remote control code of quadcopter:

Maintenance and setting

1. Switch on the quadcopter
2. The remote control is turned off. First, once press the power button, and
then press and hold until a button indicator flashes rapidly. Synchronization
mode of the remote control is on.
3. Set the PTZ camera installation / disassembly button, remove the cover
and locate the code hole. Using the supplied screwdriver to the main
assembly, press and hold this hole for 1 second. Three specific remote
control signals to indicate successful pairing. At the same time remote
control power button light will change color to white.
Installation / disassembly PTZ
camera button

7. Setting a remote control stick

If during flight you notice a discrepancy between flight unit and your actions
on the remote control, try setting the remote control stick. If there was a
gap to connect the remote control with quadcopter, make the necessary
settings in the app.
15
Remote control code hole