Fujitsu LIFEBOOK A6120 SERIES User Manual page 58

Problem
Shutdown and Startup Problems
BIOS setup changes were
Your notebook
appears to change not saved when you made
setup parameters them and exited the BIOS
setup utility returning it to
when you start it.
previous settings.
The BIOS CMOS hold-up
battery has failed.
Your system The system may be
display won't turn password-protected.
on when the
system is turned
on or when the
system has
resumed.
Video Problems
The built-in display Something is pushing on
the Closed Cover switch.
is blank when you
turn on your
LifeBook notebook.
Possible Cause
Make sure you select Save Changes And Exit
when exiting the BIOS setup utility.
Contact your support representative for
repairs.
This is not a user serviceable part but has a
normal life of 3 to 5 years.
Check the status indicator panel to verify that
the Security icon is blinking. If it is blinking,
enter your password.
Clear the Closed Cover switch.
Tr o u bl e s h o o t i n g
Possible Solution
47