Contents; Gt5-A604 Specifications - JBL GT5-A604 Service Manual

GT5-A604

GT5-A604 Specifications

Output Power:
(14.4V supply)
Signal-to-noise ratio:
Total Peak power:
Frequency response:
THD+N 1KHz LPF=22KHz
Channel Separation
Input Impedance
Maximum input signal:
Maximum sensitivity:
Hi-Pass, Low Pass X-over Limits
Bass Boost @ 50Hz
DC Offset
Output regulation:
Idle Current @ 4 ohms
Max Current Draw
Remote Operating Voltage
Turn-on delay time
Circuit Protection
Dimensions:
Fuse:
JBL continually strives to update and improve existing products, as well as create new ones. The specifications and details in
this and related JBL publications are therefore subject to change without notice.

- CONTENTS -

SPECIFICATIONS ...............................................1
PACKING............................................................2
CONTROL/INSTALLATION DRAWINGS..................3
CONTROL/INSTALLATION INSTRUCTIONS.............4
BASIC TROUBLESHOOTING.................................5
EXPLODED VIEW/PARTS LIST...............................6
AMPLIFIER BLOCK DIAGRAM...............................7
ELECTRICAL PARTS LIST ....................................8
P.C.B. DRAWINGS...............................................11
IC/TRANSISTOR PINOUTS....................................15
SCHEMATICS.....................................................16
60W RMS x 4 channels @ 4 ohms; ≤1% THD + N
80W RMS x 4 channels @ 2 ohms; ≤1% THD + N
160W RMS x 2 channel (bridged) @ 4 ohms; ≤1% THD + N
85dBA (reference 1W into 4 ohms)
102dBA (reference rated power into 4 ohms)
640W
10Hz – 100kHz (–3dB)
≤0.05% (rated power @ 4 ohms)
≥50db
15kΩ
6.0V
200mV
32Hz – 320Hz ±20% 12dB/oct
0-6dB
<30mV
40dB
1.1A
≤35A
5V
3 sec
Temperature (85±5C), Short circuit, Operating voltage range (8-16V)
2 1/8 x 9 1/4 x 12" (54 x 235 x 305mm)
2 x 20A
1