Maintenance; Storage - Philips Quadra 7800XLCC User Manual

ENGLISH
26
C
Discard any remaining cleaning solution in
3
the canister.
The cleaning solution can be safely poured down
the sink as there are no harmful ingredients.
C
Simply rinse the canister with warm water.
4
Wipe the canister with a towel or tissue
to remove excess water.
C
Carefully lower the Jet Clean System over
5
the canister making sure the release
buttons snap back into position.

Maintenance

◗ Always remove razor from the Jet Clean
System before cleaning appliance.
◗ Unplug the Jet Clean System.The Jet Clean
System may be wiped clean using a damp cloth.
◗ Before refilling transparent cleaning reservoir,
discard remaining cleaning solution and rinse
the outside and inside of the reservoir
completely with warm water from the tap.
◗ Water from the tap should be on a warm
setting to clean all washable parts.
Note; DO NOT place or clean any parts of the
Jet Clean System in a dishwasher.

Storage

C
◗ The razor can be placed in the Jet Clean
System for safe storage. If storing razor in Jet
Clean System, remove the plug from outlet as
soon as the razor is fully charged or cleaned.
◗ If appliance will not be used for an extended
period of time, it is recommended that the
cleaning solution in both the reservoir and
canister be emptied out before storing.
◗ Be sure razor is turned off. Remove cord from
outlet and razor or Jet Clean System before
storing in a safe, dry location where it will not
be crushed, banged, or subject to damage.
◗ Do not wrap cord around razor or Jet Clean
System when storing.
◗ Store cord in a safe location where it will not
be cut or damaged.
◗ Do not keep razor or Jet Clean System
permanently plugged into outlet.
◗ Do not place or store razor or Jet Clean
System where it can fall or be pulled into a
tub or sink, water or other liquid while
plugged in.
C
◗ If storing razor outside the Jet Clean System,
put the Protective Razor Head Cap on razor
to protect heads.
ENGLISH
27