Trouble Shooting; Usda Cooking Guidelines; Warranty - Bella 14595 Instruction Manual

Trouble Shooting

The Digital Pressure Cooker is equipped with safety features that will shut the unit down if an abnormal
condition is encountered during pressure or slow cooking. An error signal will be displayed on the control
panel. Depending on the error, audible beeping may be heard. Once the problem has been identified and
corrected, plug in the unit and resume pressure cooking.
ERROR DISPLAY : E0
Description
The lid is incorrectly used. If the lid is not locked
correctly and a function is selected, an audible beep
can be heard the error message "E0" will be displayed.
Searing/Browning with lid attached, an audible beep
can be heard the error message "E0" will be displayed.
Lid is opened during SLOW COOK. Constant beeping
can be heard and the error message "E0" will be
displayed.

USDA Cooking Guidelines

PLEASE NOTE: Cook all food to these minimum internal temperatures as measured with a food
thermometer before removing food from the heat source. For reasons of personal preference,
consumers may choose to cook food to higher temperatures. This chart is intended as a general guide
by the USDA.
Product
Beef, Pork, Veal & Lamb
Steaks, chops, roasts
Pork
Ground meats
Ham, fresh or smoked (uncooked)
Fully Cooked Ham (to reheat)
Product
All Poultry (breasts, whole bird, legs,
thighs, and wings, ground poultry,
and stuffing)
Eggs
Fish & Shellfish
Leftovers
Casseroles
SO-313533_14595_BELLA_8qt Pressure cooker_BJ's_IM_R5.indd 14-15
Solution
Make sure lid is correctly locked in position.
Remove lid. Always cook with lid removed
when SEARING or BROWNING foods.
When using SLOW COOK function, you may
remove the lid to check on food, stir contents,
add food or liquids during cooking. Replace
lid and lock properly. SLOW COOK will
resume.
Minimum Internal Temperature & Rest Time
145 °F (62.8 °C) and allow to rest for at least 3 minutes
160 °F (71.1 °C)
160 °F (71.1 °C)
145 °F (62.8 °C) and allow to rest for at least 3 minutes
Reheat cooked hams packaged in USDA-inspected plants
to 140 °F (60 °C) and all others to 165 °F (73.9 °C).
Minimum Internal Temperature
170 °F (77 °C)
160 °F (71.1 °C)
145 °F (62.8 °C)
165 °F (73.9 °C)
165 °F (73.9 °C)
14
Limited TWO-YEAR Warranty
SENSIO Inc. hereby warrants that for a period of TWO YEARS from the date
of purchase, this product will be free from mechanical defects in material and
workmanship, and for 90 days in respect to non-mechanical parts. At its sole
discretion, SENSIO Inc. will either repair or replace the product found to be
defective, or issue a refund on the product during the warranty period.
The warranty is only valid for the original retail purchaser from the date of initial
retail purchase and is not transferable. Keep the original sales receipt, as proof
of purchase is required to obtain warranty validation. Retail stores selling this
product do not have the right to alter, modify, or in any way revise the terms and
conditions of the warranty.
EXCLUSIONS:
The warranty does not cover normal wear of parts or damage resulting from
any of the following: negligent use of the product, use of improper voltage or
current, improper routine maintenance, use contrary to the operating instructions,
disassembly, repair, or alteration by anyone other than qualified SENSIO Inc.
personnel. Also, the warranty does not cover Acts of God such as fire, floods,
hurricanes, or tornadoes.
SENSIO Inc. shall not be liable for any incidental or consequential damages
caused by the breach of any express or implied warranty. Apart from the extent
prohibited by applicable law, any implied warranty of merchantability or fitness
for a particular purpose is limited in time to the duration of the warranty. Some
states, provinces or jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on how long an implied
warranty lasts, and therefore, the above exclusions or limitations may not apply to
you. The warranty covers specific legal rights which may vary by state, province
and/or jurisdiction.
HOW TO OBTAIN WARRANTY SERVICE:
You must contact Customer Service at our toll-free number: 1-866-832-4843.
A Customer Service Representative will attempt to resolve warranty issues
over the phone. If the Customer Service Representative is unable to resolve the
problem, you will be provided with a case number and asked to return the product
to SENSIO Inc. Attach a tag to the product that includes: your name, address,
daytime contact telephone number, case number, and description of the problem.
Also, include a copy of the original sales receipt. Carefully package the tagged
product with the sales receipt, and send it (with shipping and insurance prepaid)
to SENSIO Inc.'s address. SENSIO Inc. shall bear no responsibility or liability for
the returned product while in transit to SENSIO Inc.'s Customer Service Center.
15
2016-07-29 11:13 AM