Norelco 6853XL Product Manual page 9

ENGLISH
16
C
Brush the slots of the comb.
10
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Norelco Razor Head Cleaner, model RC1776
or alcohol) and lubricated with Norelco Razor
Lubricant, model AL80, or one drop of mineral oil
(in the center of the head).This helps prevent
wear of the shaving heads.
C
Replace the cutter and comb into the
11
Razor Head Assembly.
Repeat the process for the other two sets
12
of cutters and combs.
Replace the frame.
13
C
Turn the wheel clockwise until it locks into
14
place.
C
Replace the Razor Head Assembly back on
15
razor.
Put the protective razor head cap on the
16
razor to protect heads.
After Each Use:Trimmer
Turn razor to OFF (O) position.
1
C
Push trimmer slide switch up to pop up
2
trimmer.
C
Clean trimmer with the brush every time
3
you use it.
C
Lubricate the trimmer teeth with Norelco
4
Razor Lubricant (model AL80) or with one
drop of mineral oil every 6 months.
Close trimmer by sliding trimmer switch
5
down.
This razor has no other user-serviceable parts.
Any other service should be performed by an
Authorized Norelco Service Location.
ENGLISH
17