Download Print this page

SLE AEDI RECESSED 1 User Manual

Advertisement

Quick Links

1. ATTENTION
Consider the respective national norms during the installation!
-
Do not install the fixture near high inflammable liquids or materials.
-
Do not allow anything to rest on the fixture.
-
Do not install the fixture near the naked flames.
-
Do not install the fixture in dirty or dusty location.
-
Do not looking directly into the LED light beam at close range.
-
Turn off the power prior to light fixture installation!
-
The light fixture may be installed only by a qualified person!
-
The light fixture must be wired according to respective electrical standards.
-
The manufacturer shall not be liable for any modifications of the product of incorrect
-
installation of the product.
2. ABOUT THE PRODUCT
The stylishly modern and unassuming exterior of AEDI RECESSED houses state-of-the-art
White technology and made using highest quality materials and construction methods. Bringing
the flexibility to outdoor application, this powerful lighting fixture is ideally suited to use in
landscape and building illumination and IP65 ensures safe operation in even the most
demanding areas.
User manual
AEDI RECESSED 1
version 1.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the AEDI RECESSED 1 and is the answer not in the manual?

Questions and answers

Summary of Contents for SLE AEDI RECESSED 1

  • Page 1 User manual version 1.0 AEDI RECESSED 1 1. ATTENTION Consider the respective national norms during the installation! Do not install the fixture near high inflammable liquids or materials. Do not allow anything to rest on the fixture. Do not install the fixture near the naked flames.
  • Page 2 3. TECHNICAL SPECIFICATIONS ITEM AEDI RECESSED 1 Mounting: : : : Recessed Optical systems: None LED Device: OSRAM LEDs LED color variants: 3000K / 4000K / 5700K Up to 60lm Lumen Output: Input Voltage: : : : 12-24 V DC...
  • Page 3 The maximum length of the cable (2 x core 2,5mm) between POWER SUPPLY and the last luminaire cannot exceed more than 80 m. The joining procedure:...
  • Page 4 5. DIMENSIONS: 6. MAINTANANCE: Clean the front transparent cover at least every 1-2 months. Use a moist, lint-free cloth. Never use alcohol or solvents. WWW.SLEPROJECTS.COM © 2014 SLE . All specifications subject to change without notice...