LG 42LS75C Owner's Manual page 48

12
Configuring Set ID
SETTINGS /
Set ID (1 to 1000): Assigns a unique Set ID number to each product when several products are connected
y
for display. Assign numbers ranging from 1 to 1000 and exit the option. You can control each product
separately by using the Set ID you assigned to each product.
Auto Set ID: Automatically assigns a unique Set ID number to each set when several products are
y
connected for display.
Reset Set ID: Resets the Set ID of the product to 1.
y
Using Tile Mode
Only applies to certain models.)
(
SETTINGS /
You can configure the integrated screen in the same way as each screen is configured.
Row (1 to 15): Sets the number of tile rows.
y
Column (1 to 15): Sets the number of tile columns.
y
Tile ID (1 to 225): Sets the Tile ID. The ID you selected will be displayed on the screen.
y
Natural: For a more natural display, the image is partly omitted to account for the distance between the
y
screens.
Natural Size: Sets the distance between screens for Natural mode.
y
Reset: Resets the tile settings to 2 x 2.
y
NOTE
If Tile mode is set to On, Smart Energy Saving mode will be disabled to provide the same picture quality as
y
other displays.
Only 4 x 4 is available for certain models. (For 1080p or higher.)
y
To use this function, the product:
y
- Must be displayed with other products.
- Must be operated by connecting to each display via a distributor or DP daisy chain.
- Tile Mode: Horizontal x Vertical (Horizontal = 1 to 15, Vertical = 1 to 15)
- 15 x 15 is available
General Set ID
General Tile Mode