1. Manuals
  2. Brands
  3. LG Manuals
  4. Digital Signage
  5. 55LS73C
  6. Owner's manual

LG 55LS73C Owner's Manual

Monitor signage
Hide thumbs Also See for 55LS73C:
Table of Contents

Advertisement

Quick Links

Download this manual
Depending upon country / Závisí na zemi / Afhængigt af landet / En función del país / Maan
mukaan / Selon pays / Abhängig vom Land / Ανάλογα με τη χώρα / Országfüggő / Tergantung
pada negaranya / A seconda del Paese / Елге байланысты / 지역에 따라 다름 / Afhankelijk
van het land / Avhengig av land / Zależnie od kraju / Dependendo do país / В зависимости от
страны / Závisí od krajiny / Beroende på land / 視國家/地區而定 /
від країни / Mamlakatga bog'liq ravishda / 国によって異なります / Depende do país / ‫תויולת‬
‫دلبلا بسح / הנידמב‬
*MFL69703701*
LG Digital Signage
(MONITOR SIGNAGE)
42LS75C 49LS75C 55LS75C
42LS73C 49LS73C 55LS73C
42LS73D 49LS73D 55LS73D
AAA
Ülkeye bağlı
/ Залежно
P/No: MFL69703701 (1703-REV02)
Printed in Korea

Advertisement

Table of Contents
loading

Related Manuals for LG 55LS73C

Summary of Contents for LG 55LS73C

  • Page 1 LG Digital Signage (MONITOR SIGNAGE) 42LS75C 49LS75C 55LS75C 42LS73C 49LS73C 55LS73C 42LS73D 49LS73D 55LS73D Depending upon country / Závisí na zemi / Afhængigt af landet / En función del país / Maan mukaan / Selon pays / Abhängig vom Land / Ανάλογα με τη χώρα / Országfüggő / Tergantung pada negaranya / A seconda del Paese / Елге...
  • Page 2 (Term : LS75C, LS73C, LS73D) Norsk Du kan laste ned webhåndbøker for dette produktet fra de følgende webområdene. (Nøkkelord : LS75C, LS73C, LS73D) • Brazil : www.lg.com/br • World Wide : www.lg.com • 日本 : www.lg.com/jp • 한국 : www.lge.co.kr...
  • Page 3 Você pode fazer download dos manuais na Web deste produto nos Brasil seguintes sites. (Palavra-chave : LS75C, LS73C, LS73D) (LS75C, LS73C, LS73D (LS75C, LS73C, LS73D • Brazil : www.lg.com/br • World Wide : www.lg.com • 日本 : www.lg.com/jp • 한국 : www.lge.co.kr SuperSign : http://partner.lge.com...
  • Page 4 HDMI OUT Network AUDIO OUT DVI OUT...
  • Page 5 DP OUT...
  • Page 9 OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 42LS75C 42LS73C 49LS75C 49LS73C 55LS75C 55LS73C www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.

  • Page 10: Table Of Contents

    - Connecting the Stand ..........15 - Connecting the Speakers ..........16 - IR & Light Sensor Connection .........17 - Portrait Layout ..............18 - Attaching and removing the LG Logo Bracket ................19 - Installing on a Wall ............21 REMOTE CONTROL ....24 MAKING CONNECTIONS ...

  • Page 11: Safety Precautions

    WARNING - This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. SAFETY PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
  • Page 12 If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station), failure to do so will invalidate the warranty.

  • Page 13: Precautions To The Ac Adapter And Electrical Power

    - If loosely connected, the poor connection may cause a fire or electric shock. • Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. - The use of non-approved products may cause a fire or electric shock.
  • Page 14 • If you don’t intend to use the product for a long time, unplug the power cable from the product. - Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. • Fix the power cable completely. - If the power cable is not fixed completely, a fire can break out.

  • Page 15: Precautions In Moving The Product

    Precautions In Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. •...

  • Page 16: Precautions In Using The Product

    Precautions In Using the Product WARNING • Do not disassemble, repair or modify the product at your own discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. • When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. •...

  • Page 17: Mounting On A Wall

    • Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining. CHEMICALS WATER • Do not use products using high voltage around the Monitor. (e.g., a bug zapper) - Monitor may have malfunction as its electrical shock.

  • Page 18: Licenses

    LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

  • Page 19: Assembly And Preparation

    SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model. • The warranty will not cover any damage caused by using the product in an excessively dusty environment.

  • Page 20: Optional Accessories

    Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Stand kit Screws Stand Diameter 4.0 mm x Pitch 0.7 mm x Length 10 mm ST-200T...
  • Page 21 OPS kit KT-OPSA Screws Connecting Cable Card (Easy Setup Guide) Power Cord Pixel sensor kit KT-SP0 Wi-Fi Dongle kit AN-WF500 NOTE • Cable holder/cable tie may not be available in some areas or for some models. • Optional accessories are available for some models. If necessary, please purchase them separately. •...

  • Page 22: Parts And Buttons

    Parts and Buttons The image may be different according to the model. Buttons INPUT: Changes the input source. • • MENU: Accesses the main menus, or saves your input and exits the menus. • : Adjust the up and down. •...

  • Page 23: Connecting The Stand

    Connecting the Stand - For certain models only. - The image may be different according to the model.

  • Page 24: Connecting The Speakers

    Connecting the Speakers - For certain models only. - The image may be different according to the model. Connect an input signal cable before installing the speakers. Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a connection.

  • Page 25: Ir & Light Sensor Connection

    IR & Light Sensor Connection When the cable is connected to the product, the feature for receiving remote control signals is activated. The IR & Light sensor is magnetic. Attach it to the corner of the front side of the product for use. [Front] CAUTION CAUTION...

  • Page 26: Portrait Layout

    Portrait Layout When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen). Using Kensington Lock (This is not available for all models.) The Kensington security system connector is located at the back of the monitor. For more information on installation and use of this system, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.

  • Page 27: Attaching And Removing The Lg Logo Bracket

    Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Remove the two screws that secure the LG Logo Bracket to the bottom of the rear side of the monitor using a screwdriver.
  • Page 28 LG Logo Bracket to the bottom of the rear side of the monitor using a screwdriver. After removing the screws, remove the LG Logo Bracket. Align the LG Logo Bracket with the holes on the right side...

  • Page 29: Installing On A Wall

    Screws which are longer than standard length may damage the inside of the monitor. A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents related to the use of non-standard screws.
  • Page 30 Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock. • If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount and contact your local dealer or qualified personnel to assist with the installation.
  • Page 31 Securing the monitor to a wall (optional) (Procedure may differ depending on the model.) Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor. - If there are already bolts inserted in the eyebolts’ position, remove the other bolts first. Mount the wall brackets with the bolts to the wall.

  • Page 32: Remote Control

    REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
  • Page 33 Selects the Picture Mode. Activates the Launcher. Enters the White Balance menu. Accesses the main menus or saves your input and exit menus. SuperSign menu key. Navigation Buttons Scrolls through menus or options. Selects menus or options and confirms your input. Allows you to move back one step in the user interaction function.

  • Page 34: Making Connections

    MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided.
  • Page 35 NOTE • For the best image quality, using the monitor with HDMI connection is recommended. • To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a D-sub 15- pin cable and DVI-D/HDMI cable. •...

  • Page 36: Daisy Chain Monitors

    Daisy Chain Monitors To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product. * DP Cable - Use a DP cable that is certified to DP1.1a (SST), DP1.2 (MST) or higher.

  • Page 37: Using The Input List

    Using the Input List → • HDMI1 → HDMI2 → DISPLAYPORT → OPS/DVI-D...

  • Page 38: Troubleshooting

    TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Does the “Invalid Format” message • The signal from the PC (Graphics card) is out of the vertical or appear? horizontal frequency range of the product.
  • Page 39 After-image appears on the product. Problem Action After-image appears when the product is • If you use a fixed image for a long time, the pixels may be damaged. turned off. Use the screen-saver function. • When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking.
  • Page 40 CAUTION • Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image.

  • Page 41: Product Specifications

    PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen Video signal Maximum resolution...
  • Page 42 Head + Speaker 1094.6 mm x 637.4 mm x 81.3 mm / 16.4 kg Head + Speaker + Stand 1094.6 mm x 699.7 mm x 298.3 mm / 17.8 kg 55LS75C / 55LS73C LCD screen Pixel pitch 0.630 mm (H) x 0.630 mm (V)
  • Page 43 HDMI/ DVI-D/ DisplayPort/ OPS (PC) Support mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 800 x 600 37.879 60.317 1024 x 768 48.363 1280 x 720 44.772 59.855 1366 x 768 47.712 1280 x 1024 63.981 60.02 1680 x 1050 65.290 59.954 1920 x 1080...
  • Page 44 Make sure to read the Safety Precautions before using the product. The model and serial numbers of the SET are located on the back and one side of the SET. Record it below should you ever need service. Temporary noise is normal when powering ON or OFF MODEL this device.
  • Page 45 USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. webOS 3.0 www.lg.com...
  • Page 46 How to Use copyright notices are available for download. Follow the steps below if you encounter LG Electronics will also provide open issues with your security certificate while source code to you on CD-ROM for a attempting to access.

  • Page 47: User Settings

    NOTE The software-related contents may be changed without prior notice due to upgrade of the product functions. Some features described in the User Guide may not be supported in certain models. SNMP 2.0 is supported. USER SETTINGS Main Menu Settings Picture Settings To Select Picture Mode Picture...
  • Page 48 To fine-tune the picture mode Picture Picture Mode Settings Customize SETTINGS / Backlight/OLED LIGHT: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to 100, the brighter the screen is. Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value is to 100, the greater the difference is.
  • Page 49 Picture Options: customizes the picture options. – Noise Reduction: Removes irregularly generated tiny dots for a clear picture. MPEG Noise Reduction: Reduces the noise produced while creating digital video signals. – Black Level: Adjusts the black level of the picture to correct the brightness and contrast of the picture. –...
  • Page 50 To use the Energy Saving function Picture Energy Saving SETTINGS / Reduces power consumption by adjusting peak screen brightness. Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only with certain models.) Off: disables the Energy Saving mode. Minimum/Medium/Maximum: uses the Energy Saving according to the Energy Saving level specified for your monitor.

  • Page 51: Sound Settings

    Sound Settings Only applies to certain models. To select a Sound Mode Sound Sound Mode SETTINGS / The best sound quality will be selected automatically depending on the video type currently being watched. Standard: this sound mode works well for content of all types. Cinema: optimizes sound for watching movies.
  • Page 52 Some recently connected devices may automatically attempt to reconnect to the Signage monitor when it is turned on. It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting.

  • Page 53: Network Settings

    Network Settings To Set a Signage Monitor Name Network Signage Name SETTINGS / You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard. To Set Your Wired Network Network Wired Connection (Ethernet) SETTINGS / Connecting to a wired network: Connect your monitor to a local area network (LAN) via the LAN port, and configure the network settings.
  • Page 54 For details, contact your ISP. LG is not responsible for any malfunction of the display and/or the Internet connection feature due to communication errors/malfunctions associated with your Internet connection, or other connected equipment.

  • Page 55: General Settings

    General Settings To configure the language General Menu Language SETTINGS / Select one of the languages on the menu displayed on the screen. Menu Language: sets a language for Signage. Setting up the keyboard language General Keyboard Languages SETTINGS / Select the language you wish to show on the keyboard.
  • Page 56 Configuring Set ID General Set ID SETTINGS / Set ID (1 to 1000): Assigns a unique Set ID number to each product when several products are connected for display. Assign numbers ranging from 1 to 1000 and exit the option. You can control each product separately by using the Set ID you assigned to each product.
  • Page 57 Configuring the Dual-View Screen [For double-sided flat OLED models only] General Dual-View Screen Setting SETTINGS / Front Screen Name: Sets the name of the front screen. Back Screen Name: Sets the name of the back screen. Screen Swap: Swaps the images on the front and back side of the screens. Screen Mirroring: Copies the image of the current screen to the opposite screen.

  • Page 58: Entertainment

    ENTERTAINMENT Using Multimedia Features Connecting USB/SD Storage Devices Connect a USB storage device such as a USB flash memory, SD storage devices or an external hard drive to the display and use multimedia features. CAUTION Do not turn the monitor off or remove the USB storage device while Photo & Video or Music is playing. Back up files you have saved on a USB storage device frequently, as loss or damage to the files may be not covered by the warranty.
  • Page 59 Tips for using USB/SD storage devices Only a USB storage device can be recognized. A USB device does not work effectively when it is connected via a USB hub. A USB storage device using an automatic recognition program may not be recognized. A USB storage device using its own driver may not be recognized.

  • Page 60: Photo & Video

    Photo & Video The photo feature is not supported in OLED models. Supported Photo & Video Files Supported External Subtitle Format *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) NOTE Subtitles are not supported in certain models. Embedded subtitles are not supported.
  • Page 61 Maximum data transfer rate Full HD video H.264 1920 x 1080@60P BP/MP/HP@L4.2 40 Mbps HEVC 1920 x 1080@60P MP@L4.1, Main10 Profile@L4.1 40 Mbps Ultra HD [Applies only to Ultra HD models] H.264 1920 x 1080@60P 4096 x 2160@30P BP/MP/HP@L5.1 50 Mbps HEVC 4096 x 2160@60P MP@L5.1, Main10 Profile@L5.1 50 Mbps Supported Photo File File Format...

  • Page 62: Viewing Photos And Videos

    [For Ultra HD models only] Ultra HD image: 3840 X 2160 Some HEVC-encoded Ultra HD videos other than the content officially provided by LG Electronics may not be played. Some codecs can be used after upgrading software.

  • Page 63: Scheduled Playing

    Scheduled Playing Only applies to certain models. You can schedule your selected content to play at a certain time. (Scheduled playing is available with external inputs.) HOME / Select your desired storage device. Enter the folder that contains the file you wish to schedule. Click the NEW SCHEDULED PLAYING button in the upper right.

  • Page 64: Music

    Music Supported Music Files File Format Item Information .mp3 Bit rate 32 Kbps to 320 Kbps Sample freq. 16 KHz to 48 KHz Support MPEG1, MPEG2 Channels Mono, Stereo .wav Bit rate Sample freq. 8 kHz to 48 kHz Support Channels Mono, Stereo .ogg...

  • Page 65: Supersign Contents

    SuperSign Contents Plays stored files using the Export option in SuperSign Editor. To play back the stored files using the Export option HOME / Only contents distributed by SuperSign Manager are displayed and selectable. If there is a USB/SD storage device connected, the image on the USB/SD device is outputted additionally.

  • Page 66: Local Contents Scheduler

    Local Contents Scheduler Only applies to certain models. The recommended resolution for scheduled photo playback is 4096 x 2160 or below. Setting a Scheduled Playing You can create a scheduled playing using the Local Contents Scheduler and the Photo & Video app. Scheduled Playing with Photo &...

  • Page 67: Screen Share

    Run the Intel WiDi ( ) program on your laptop. Any nearby LG Signages supporting WiDi are detected. In the list of detected displays, select a Signage to connect to and then, click Connect. Enter the 8-digit PIN number (a) displayed on the Signage in the input field of your laptop (b) and click Continue.

  • Page 68: Group Manager

    Group Manager Only applies to certain models. Using this template-based content editing program, you can produce, manage and play content. There are three modes: Master, Slave and StandAlone. The program can be used to distribute and play schedules between the Master and Slave.
  • Page 69 NOTE If you use a mobile device, you need to go through an authorization process using a PIN code. The default PIN code is ‘000000’. When using a PC, use the full screen (F11) feature in 1920 x 1080 (Full HD) resolution to view the same screen as the monitor.

  • Page 70: Leveler Tool

    Leveler Tool Only applies to certain models. You can check whether the product is horizontally and vertically level when installing the product outdoors in an enclosure. Accessing the Leveler Tool HOME / You can check whether the product is horizontally and vertically level. Exiting the Leveler Tool Exit the Leveler Tool by pressing the EXIT key on your remote control.

  • Page 71: Control Manager

    Control Manager Only applies to certain models. You can control and check the status of the display through web browser. This function is available on PC and mobile device. CAUTION Supported resolutions (this program is optimized for the following resolutions): –...

  • Page 72: How To Use

    How to Use On a PC Enter ‘https://Product IP address:3737’ in the browser's address bar to access the Control Manager login page. Enter the password in the Password window (The default password is ‘000000’). Click the Login button after entering the password to access the Dashboard. Click the face-shaped image to access the User Menu (Change Password, Logout).

  • Page 73: Follow The Steps Below If You Encounter

    Follow the steps below if you encounter issues with your security certificate while attempting to access. On Chrome Click ADVANCED Click Proceed to product IP address (unsafe)
  • Page 74 On FireFox Click Advanced Click Add Exception... Click Confirm Security Exception...
  • Page 75 On Internet Explorer Click Continue to this website (not recommended). *The text of the links and buttons may differ depending on the OS (Operating System) or language settings used.

  • Page 76: Multi-Screen

    Multi-Screen Changing Screen Input Press the button on the top right of each split Only applies to certain models. This feature allows you to view multiple external screen to select the desired input. inputs and videos on a single screen. Accessing Multi-Screen NOTE HOME /...

  • Page 77: Picture Id Settings

    PICTURE ID Settings NOTE Only applies to certain models. If PICTURE ID is set to 2, only the upper PICTURE ID is used to change the settings of a right monitor, which has a Set ID of 2, can be specific set (display) using a single IR receiver for controlled by IR signals.

  • Page 78: Ir Codes

    IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported depending on the model. Code (Hex) Function Remarks Remote control button (POWER) MONITOR ON Remote control button MONITOR OFF Remote control button Energy Saving Remote control button INPUT Remote control button...
  • Page 79 Code (Hex) Function Remarks TILE Remote control button EXIT Remote control button PICTURE ID ON (RED) Remote control button PICTURE ID OFF (GREEN) Remote control button YELLOW Remote control Button BLUE Remote control button Remote control button Remote control button Remote control button Remote control button Remote control button...

  • Page 80: To Control Multiple Products

    TO CONTROL MULTIPLE PRODUCTS Only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable The image may be different according to the model.

  • Page 81: Communication Parameter

    Communication Parameter NOTE When using three-wire connections (non- Baud Rate: 9600 BPS standard), an IR daisy chain cannot be used. Data Length: 8 bit Be sure to only use the provided gender to Parity Bit: None connect properly. Stop Bit: 1 bit When monitors connected via Daisy Chain (that Flow Control: None controls multiple monitors) are turned off and...

  • Page 82: Command Reference List

    Command Reference List COMMAND DATA (Hexadecimal) Power 00 to 01 Select input See Select Input Aspect Ratio See Aspect Ratio Energy Saving See Energy Saving Picture Mode See Picture Mode Contrast 00 to 64 Brightness 00 to 64 Sharpness 00 to 32 Color 00 to 64 Tint...
  • Page 83 COMMAND DATA (Hexadecimal) Screen off 00 to 01 Tile Mode 00 to FF Check Tile Mode Tile ID See Tile ID Natural Mode 00 to 01 DPM Select 00 to 07 Remote Control/Local Key Lock 00 to 01 Power On Delay 00 to FA Fail Over Select 00 to 02...
  • Page 84 COMMAND DATA (Hexadecimal) n, 89 Aspect Ratio(Rotation) 00 to 01 Easy Brightness Control Mode 00 to 01 Easy Brightness Control Schedule See Easy Brightness Control Schedule MultiScreen Mode & Input See MultiScreen Mode & Input Aspect Ratio(MultiScreen) See Aspect Ratio(MultiScreen) Screen Mute(MultiScreen) See Screen Mute(MultiScreen) n, 0d...

  • Page 85: Transmission/Reception Protocol

    Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: identifies between the factory setting and the user setting modes. * [Command2]: controls monitor sets. * [Set ID]: Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000(01H~3E8H) under Settings in the OSD menu.
  • Page 86 01. Power (Command: k a) 03. Aspect Ratio (Command: k c) Controls the power on/off of the set. Adjusts the aspect ratio. Transmission Transmission [k][c][ ][Set ID][ ][Data][Cr] [k][a][ ][Set ID][ ][Data][Cr] Data 01: 4:3 Data 00: Off 02: 16:9 01: On 04: Zoom Acknowledgement...
  • Page 87 05. Picture Mode (Command: d x) 08. Sharpness (Command: k k) Selects a picture mode. Adjusts the screen sharpness. Transmission Transmission [d][x][ ][Set ID][ ][Data][Cr] [k][k][ ][Set ID][ ][Data][Cr] Data 00: Vivid Data 00 to 32: Sharpness 0 to 50 Acknowledgement 01: Standard [k][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 88 12. Balance (Command: k t) Transmission Adjusts the sound balance. [k][f ][ ][Set ID][ ][Data][Cr] Transmission Data 00 to 64: Volume 0 to 100 [k][t][ ][Set ID][ ][Data][Cr] Acknowledgement Data 00 to 64: left 50 to right 50 [f ][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement * It may not be supported depending on the model.
  • Page 89 18. Off Time Schedule (Command: f c) 20. Off Timer (Repeat/Time) (Command: f e) Enables/disables the Off Time Schedule. Configures Off Timer (Repeat/Time) settings. Transmission Transmission [f ][c][ ][Set ID][ ][Data][Cr] [f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data 00: Off Data1 01: On 1.
  • Page 90 21. On timer (Repeat/Time) (Command: f d) 22. On Timer Input (Command: f u) Configures On Timer (Repeat/Time) settings. Select an external input for the current On Time setting and Transmission add a new schedule. Transmission [f ][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f ][u][ ][Set ID][ ][Data1][Cr] Data1 [f ][u][ ][Set ID][ ][Data1][][Data2][Cr]...
  • Page 91 23. No Signal Power Off (15Min) (Command: f g) 25. Language (Command: f i) Sets the monitor to enter Automatic Standby mode if there is Sets the OSD language. no signal for 15 minutes. Transmission Transmission [f ][i][ ][Set ID][ ][Data][Cr] [f ][g][ ][Set ID][ ][Data][Cr] Data 00: Czech...
  • Page 92 26. Reset (Command: f k) 29. Time Elapsed (Command: d l) Performs the reset function. Checks the elapsed time. Transmission Screen Reset can only be performed in RGB input mode. Transmission [d][l][ ][Set ID][ ][Data][Cr] [f ][k][ ][Set ID][ ][Data][Cr] Data FF: Read status Data...
  • Page 93 33. White Balance Green Gain (Command: j n) 36. White Balance Green Offset (Command: s y) Adjusts the white balance green gain value. Adjusts the white balance green offset value Transmission Transmission [j][n][ ][Set ID][ ][Data][Cr] [s][y][ ][Set ID][ ][Data][Cr] Data 00 to 7F: Green Offset 0 to 127 Data...
  • Page 94 39. Screen Off (Command: k d) 42. Tile ID (Command: d i) Turns the screen on or off. Sets the tile ID value of the product. Transmission Transmission [d][i][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 01 to E1: Tile ID 1 to 225** Data 00: turns the screen on FF: checks the tile ID...
  • Page 95 45. Remote Control/Local Key Lock (Command: k m) 48. Fail Over Input Select (Command: m j) Adjusts the remote control/local key (front) lock. Selects an input source for auto switch. Transmission * This command is only available when the Fail Over (auto) [k][m][ ][Set ID][ ][Data][Cr] mode is set to Custom.
  • Page 96 49. IR Operation (Command: t p) Data: 03 (when checking the PM mode) Configures the IR operation settings of the product. Data1 00: The PM mode is set to Screen On Transmission 01: The PM mode is set to Screen Off [t][p][ ][Set ID][ ][Data][Cr] 02: The PM mode is set to Screen Off Always 03: In Sustain Aspect Ratio mode.
  • Page 97 52. Check Screen (Command: t z) 55. PM Mode (Command: s n, 0c) Sets Check Screen. Selects the desired PM mode option. Transmission Transmission [t][z][ ][Set ID][ ][Data][Cr] [s][n][ ][Set ID][ ][0c][ ][Data][Cr] Data 00: Off Data 00: Sets the Power Off mode. 01: On 01: Sets the Sustain Aspect Ratio mode.
  • Page 98 58. Auto-adjustment (Command: j u) 57. Network Settings (Command: s n, 80 or 81 or 82) Automatically corrects the position and shaking of the picture. Configures network and DNS settings. (Works only in RGB-PC input mode.) Transmission Transmission [s][n][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ] [j][u][ ][Set ID][ ][Data][Cr] [Data5][Cr] Data1...
  • Page 99 63. Wake On LAN (Command: f w) 60. V Position (Command: f r) Selects the desired Wake On LAN option. Adjusts the vertical position of the screen. This feature only works when the Tile Mode is set to Off. Transmission * The operational range varies depending on the RGB input [f ][w][ ][Set ID][ ][Data][Cr] resolution.
  • Page 100 66. Reset to Initial Settings (Command: t n) 69. Pivot Mode (Command: t a) Enables/disables the Reset to Initial settings. Sets Pivot Mode to on/off. Transmission Transmission [t][n][ ][Set ID][ ][Data] [Cr] [t][a][ ][Set ID][ ][Data][Cr Data 00: Disables the settings. Data 00: Off 01: Enables the settings.
  • Page 101 77. Easy Brightness Control Mode (Command: s m) 73. DPM Wake up Control (Command: s n, 0b) Selects whether to turn on/off Easy Brightness Control Mode. Sets the DPM Wake up Control Mode. Transmission Transmission [s][m][ ][Set ID][ ][Data][Cr] [s][n][ ][Set ID][ ][0][b][ ][Data][Cr] Data 00: Easy Brightness Control off Data...
  • Page 102 78. Easy Brightness Control Schedule (Command: s s) 79. MultiScreen Mode & Input (Command: x c) Sets Easy Brightness Control schedules. Saves or controls the MultiScreen Mode and input. Transmission Transmission [s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [x][c][ ][Set ID][ ][Data1][ ][Data2][ ][Data3[ ][Data4] [ ][Data5[ ]Cr] Data1 Data1 (sets the MultiScreen Mode)
  • Page 103 81. Screen Mute (MultiScreen) (Command: x e) 84. Wireless Wake-on-LAN (Command: s n, 90) Turns on/off each screen in MultiScreen. Sets Wireless Wake-on-LAN. Transmission Transmission [x][e][ ][Set ID][ ][Data1][ ][Data2][Cr] [s][n][ ][Set ID][ ][9][0][ ][Data][Cr] Data 00: Off Data1 01: Controls the Main input 01: On 02: Controls the Sub1 input Acknowledgement...
  • Page 104 87. Holiday Schedule (Command: s n, 1b) 88. Dual Screen Off (Command: s n, 92) Configures the Holiday Schedule. Turn Dual Screen On or Off. Transmission Transmission [s][n][ ][Set ID] ][ ][1][a] [s][n][ ][Set ID][ ][9][2][ ][Data][Cr] [ ][Data1][ ][Data2][ ][Data3] [ ][Data4] [Cr] Data 00 : MainScreen –...
  • Page 105 91. Luminance Value Read (Command: m u) 93. Power Indicator (Command: f o) Reads luminance value. Sets the Power Indicator Settings. Transmission Transmission [m][u][ ][Set ID][ ][FF][Cr] [f ][o][ ][Set ID][ ][Data][Cr] Data 00: Off Acknowledgement 01: On [u][][SetID][][OK/NG][Data1][Data2][Data3] ** This may not be supported on some models. [Data4][Data5][Data6][Data7][x] Acknowledgement [o][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 106 96. Hybrid Mode (Command: s n, 96) 99. HDMI IT Contents (Command: s n, 99) Sets display’s transparency mode. Uses HDMI data to automatically set Picture Mode. Transmission Transmission [s][n][ ][Set ID][ ][9][6][ ][Data][Cr] [s][n][ ][Set ID][ ][9][9][ ][Data][Cr] Data 00 : Hybrid (effect: Off) Data 00: Off...
  • Page 107 102. No Signal Image (Command: s n, a9) Turns No Signal Image On or Off. Transmission [s][n][ ][Set ID][ ][a][9][ ][Data][Cr] Data 00: Off 01: On Acknowledgment [n][ ][Set ID][ ][OK/NG][a][9][Data][x] *This feature may not be supported on some models.
  • Page 109 INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating the your set and retain it for future reference. webOS 3.0 www.lg.com...
  • Page 110 CONTENTS ACCESSING Crestron INSTALLATION MENU ....4 No Signal Image Factory Reset INSTALLATION MENU ....5 Semi-Transparent Brightness (0–100) - Signage Setup..............5 Hybrid Mode Power On Status Return Interval (0–10) Wake On LAN Proximity Sensitivity LAN Daisy Chain Status Message Power Off Management SIMPLINK Setup Rotation Local Dimming...
  • Page 111 - Fail Over ................21 - Server ...................25 Set Automatically Auto Server IP Manual Server Status - ISM Method ..............22 Port Number Mode Secured Connection Repeat Link Server IP Wait Link Server Port Duration Link Server Status Action Cycle - Lock Mode .................26 Bar Image Bar Color Transparency...

  • Page 112: Accessing Installation Menu

    ACCESSING INSTALLATION MENU Press and hold the SETTINGS button for 5 seconds. When Input ID (The top right corner ) is displayed, enter your password. (The default value is 0, 0, 0, 0 • When the Installation Menu is displayed, select the desired option. - Signage Setup - USB Cloning - Password Change...

  • Page 113: Installation Menu

    INSTALLATION MENU NOTE • Some features described in the Installation manual may not be supported in certain models. Signage Setup Use this menu to configure the digital signage after installation. Power On Status • You can select the operating status of the monitor when the main power is switched on. •...

  • Page 114: Power Off Management

    Power Off Management • No Signal Power Off (15 Min) - You can choose whether to use the 15 min force off feature. - You can set this option to On or Off. - If you set this option to On, the product turns off when it has remained in no signal status for 15 minutes. - If you set this option to Off, the 15 min force off feature is disabled.
  • Page 115 • PM Mode - Power Off: Normal DC off status. - Sustain Aspect Ratio: Normal DC off status except that Switching IC stays on. On certain models, this applies only to a specific input mode (DisplayPort) and has the same effect as Screen Off Always in other input modes. - Screen Off: Automatically changes to Screen Off status when entering the DPM mode, Auto Off (15 mins, 4 hours), or Abnormal Shut Down.

  • Page 116: Rotation

    Rotation • OSD Portrait Mode - This feature allows you to rotate the OSD clockwise. - You can set this feature to Off/90/180/270. (Some models only support certain settings.) - If you set this feature to Off, the feature is disabled. - If you set this feature to 90, the OSD rotates 90 degrees clockwise.

  • Page 117: Beacon

    Enables BLE Beacon, one of Bluetooth 4.0's features. • Beacon Mode (on/off toggle): Enables the Beacon feature. • Supports LG Beacon/iBeacon/Eddystone Type Beacon features. • LG Beacon/iBeacon - Beacon UUID (hex): Sets the UUID. 1. Field1: 4byte hex value (8 digits) 2.

  • Page 118: Check Screen

    Check Screen • The Check Screen feature judges whether there are abnormalities at the edges of the screen. R, G, and B OSDs are formed on the screen at one second intervals and an Pixel Sensor tests the areas. • If set to On, the Check Screen feature is enabled.

  • Page 119: Power Indicator

    Power Indicator • Changes Power Indicator settings. • If set to On, the Power Indicator is turned on. • If set to Off, the Power Indicator is turned off. • While the product is turned on, the Power Indicator is lit for about 15 seconds regardless of whether it is set to On or Off.

  • Page 120: Sync Mode

    Sync Mode • Syncs the products to the time and content of one product. • Off: Sync is disabled. • RS-232C: Syncs multiple monitors connected via RS-232C. - Master/Slave: These monitors can be set to Master or Slave. Only one monitor should be set to Master mode for this feature to work properly.

  • Page 121: Intelligent Auto

    Intelligent Auto • Adjusts the size, position, and phase of the monitor's screen automatically at the recognized resolution. This feature is available only in RGB input mode. Studio Mode • Outputs the images with a lower color temperature. • You can set this feature to On or Off. •...

  • Page 122: Crestron

    Crestron • This function enables synchronization with applications provided by Crestron. • Server: This menu sets the server's IP address for the network connection with the server (equipment provided by Crestron). • Port: This menu sets the port for the network connection with the server. The default port number is 41794. •...

  • Page 123: Status Message

    Status Message • Sets up a feature that sends the status of Signage to users' email addresses. • The administrator can set Status Message to On or Off. • Messaging Period: Sets a time interval to send messages. You can select either When Failure Status or Weekly. •...

  • Page 124: Simplink Setup

    SIMPLINK Setup • When the SIMPLINK Setup is set to On, you can use the SIMPLINK provided by LG Signage. • Device ID: S ets the ID of the device connected via CEC wiring. You can choose a value between 'All' and 'E'.

  • Page 125: Easy Brightness Control

    Easy Brightness Control • Adjusts the backlight according to the schedule you set. • You can set this option to On/Off. • Easy Brightness Control is disabled if the current time is not set. • You can add up to 6 schedules, and they are sorted in ascending order by time. •...

  • Page 126: Guide To Using Content Rotation

    Guide to Using Content Rotation [Portrait installation setting] You can turn the image into a portrait image using Content Rotation. When installing the display rotated 90 degrees: Set Content Rotation to 270. When installing the display rotated 270 degrees: Set Content Rotation to 90. Example) When installing the display rotated 90 degrees Original Content Rotation...
  • Page 127 [Video wall installation setting] You can implement a landscape and portrait video wall using Content Rotation. Example) Tile mode 2 x 2 * Landscape video wall * Portrait video wall - Set Content Rotation to 90 Original Tile Mode <Landscape> Rotating displays Content Rotation (90 degrees)

  • Page 128: Usb Cloning

    USB Cloning You can copy the product settings to other sets. Send to USB • You can save the current settings in file format to a USB device. • Select the file name and press the OK button to complete •...

  • Page 129: Fail Over

    Fail Over The input source with the highest priority will be selected. • The Auto-Fail Over feature is disabled. Auto • The input source changes according to the specified order. When several input sources are found, the input source with the highest priority will be selected. •...

  • Page 130: Ism Method

    ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode • Selects the desired ISM Method mode. • Normal: Disables the ISM method.

  • Page 131: Action Cycle

    Action Cycle • You can select from among 1–10 mins/20 mins/30 mins/60 mins/90 mins/120 mins/180 mins/240 mins. • This option is available only when you have selected Inversion or Orbiter. • Orbiter: Moves the position of the screen at specified intervals. •...

  • Page 132: Bar Image Download

    Bar Image Download • To download an image, the image file must be located under the folder titled "ISM" on your USB drive. • Make sure to delete the old images stored in the internal memory before downloading a new image file. •...

  • Page 133: Server

    Server Set Automatically • The monitor settings will be set automatically so that the SuperSign server can search it. Server IP • This is a menu where you can set an IP address for the SuperSign server. Server Status • Server Status displays the status of the connection between your monitor and the SuperSign server.

  • Page 134: Lock Mode

    Lock Mode • You can prevent the use of USB devices. • You can prevent OSD from displaying. Reset to Initial Settings • You can restore the initial settings with this feature. IR Operation • If you set IR Operation to Normal, you can use the remote control. •...

This manual is also suitable for:

49ls75c55ls75c42ls73c49ls73c42ls75c42ls73d ... Show all

Table of Contents